AEG FSK31600Z- Manuals

Page 2 - spend a few minutes reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.; SAFETY INFORMATION; Before the installation and use of the appliance,

CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Put the cutlery in the cutlery basket with the sharp ends pointing down or put them in the cutlery drawer in a horizontal position with the sharp edges down. • Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. • Before any maintenance operation, deact...

Page 7 - Indicators; PROGRAMMES; Information for test

4.1 Indicators Indicator Description Running programme indicator. It comes on when the programme startsand goes off when the programme is completed. End indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. 5. PR...

Page 8 - SETTINGS

6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. Settings available in the user mode: • The level of water softener according to the water hardness. • Activation or deactivation of t...

Page 10 - How to deactivate AirDry; BEFORE FIRST USE; The salt container

During the drying phase, the door opens automatically and remains ajar. CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. AirDry is automatically activated with allprogrammes excluding (if applicable). CAUTION! If childr...

Page 11 - DAILY USE; Using the detergent

6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion. 7.2 How to fill the rinse aid dispenser A B D C M A X 1 2 3...

Page 13 - HINTS AND TIPS

End of the programme When the programme is completed theindicator is on. 1. Press the on/off button or wait for the appliance to switch to standby mode. If you open the door before the activation of standby mode, the appliance is automatically deactivated. 2. Close the water tap. 9. HINTS AND TIPS 9...

Page 14 - CARE AND CLEANING; Cleaning the filters

• Soak cookware with burnt-on food before washing it in the appliance. • Put hollow items (cups, glasses and pans) with the opening facing downwards. • Make sure that glasses do not touch each other. • Put light items in the upper basket. Make sure that the items do not move freely. • Put cutlery an...

Page 16 - TROUBLESHOOTING

11. TROUBLESHOOTING If the appliance does not start or it stops during operation, before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. WARNING! Repairs not properly done may result in serious risk to the safety...

Page 17 - The washing and drying results are not satisfactory

Problem and alarm code Possible cause and solution The appliance stops and starts moretimes during operation. • It is normal. It provides optimal cleaning re- sults and energy savings. The program lasts too long. • If the delayed start option is set, cancel the de- lay setting or wait for the end of...

Page 19 - TECHNICAL INFORMATION; ENVIRONMENTAL CONCERNS

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • The level of salt is low, check the refill indicator.• The cap of the salt container is loose.• Your tap water is hard. Refer to "The water softener" . • Even using multi-func...