AEG FSILENCEW0P- Manuals

Page 2 - Visit our website for:; Register your product for better service:; CUSTOMER CARE AND SERVICE; General information and tips

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable; Only for UK and Ireland.; Water connection

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 6 - Indicators; ExtraHygiene indicator.; PROGRAMMES; Programme; Multitab

1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Start button 7 Indicators 8 Option button Indicators Description Multitab indicator. ExtraHygiene indicator. Washing phase indicator. It comes on when the washing phaseoperates. Rinsing phase indicator. It comes on wh...

Page 7 - Information for test institutes; Write down the product number (PNC) that is on the rating plate.; OPTIONS

Programme Degree of soilType of load Programmephases Options 5) Normal soilCrockery and cut-lery PrewashWash 50 °CRinsesDry ExtraHygieneMultitab 1) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, th...

Page 8 - ExtraHygiene; Option; BEFORE FIRST USE; Adjusting the water softener

How to activate the Multitab option1. Press Option until the Multitab indi- cator comes on. If you stop to use the combidetergent tablets, before you start touse separately detergent, rinse aidand dishwasher salt, do these steps:1. Set the water softener to the highestlevel. 2. Make sure that the sa...

Page 9 - lay; Filling the salt container

Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Level < 4 < 7 < 0.7 < 5 1 2) 1) Factory position. 2) Do not use salt at this level. How to adjust the level of thewater softener 1. Press the on/off button to activatethe appliance. M...

Page 10 - Filling the rinse aid dispenser; DAILY USE; • If the rinse aid indicator is on, fill; Using the detergent; Press the release button (

6.3 Filling the rinse aid dispenser M AX 1 2 3 4 + - A B D C 1. Press the release button ( D ) to open the lid ( C ). 2. Fill the rinse aid dispenser ( A ), no more than the mark 'max'. 3. Remove the spilled rinse aid with anabsorbent cloth to prevent too muchfoam. 4. Close the lid. Make sure that t...

Page 12 - Important; HINTS AND TIPS

Important • Let the dishes become cold before you remove them from the appliance.Hot dishes can be easily damaged. • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainlesssteel becomes cool more quickly ...

Page 13 - CARE AND CLEANING; Cleaning the filters

• The position of the items in the bas- kets is correct. • The programme is applicable for the type of load and for the degree of soil. • The correct quantity of detergent is used. • There is dishwasher salt and rinse aid (unless you use combi detergent tab-lets). • The cap of the salt container is ...

Page 14 - TROUBLESHOOTING; - The appliance does not fill with; Problem; The programme does not start.; Start; Make sure that the water tap is open.

9.3 External cleaning Clean the appliance with a moist softcloth.Only use neutral detergents. Do not useabrasive products, abrasive cleaningpads or solvents. 9.4 Internal cleaning If you regularly use short duration pro-grammes, these can leave deposits of grease and limescale inside the appli-ance....

Page 15 - Close the water tap and contact the Service.; If the washing and drying; Dishes are wet; How to activate the rinse; TECHNICAL INFORMATION; Dimensions

Problem Possible solution Make sure that the drain hose has no kinksor bends. The anti-flood device is on. Close the water tap and contact the Service. After the checks are completed, activatethe appliance. The programme contin-ues from the point of interruption.If the problem occurs again, contact ...

Page 16 - ENVIRONMENT CONCERNS

Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 12 Power consumption Left-on mode 0.10 W Off-mode 0.10 W 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If th...