AEG FSILENCEVI- Manuals

Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable; Only for UK and Ireland.; Water connection

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 5 - PRODUCT DESCRIPTION

2. PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Air vent 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 2.1 Beam-on-Floor The Beam-on-Floor is a light that...

Page 6 - CONTROL PANEL; Delay; Indicators; Salt indicator. It is always off while the programme operates.; PROGRAMMES; Programme; Multitab

3. CONTROL PANEL 1 2 8 3 4 5 6 7 9 1 On/off button 2 Display 3 Delay button 4 Programme button (down) 5 Programme button (up) 6 ExtraHygiene button 7 Multitab button 8 RESET button 9 Indicators Indicators Description Salt indicator. It is always off while the programme operates. Rinse aid indicator....

Page 7 - Consumption values; Information for test institutes

Programme Degree of soilType of load Programmephases Options 5 5) Normal soilCrockery and cut-lery PrewashWash 50 °CRinsesDry Multitab 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for...

Page 8 - OPTIONS; ExtraHygiene; Acoustic signals

5. OPTIONS Activate or deactivate the op-tions before the start of a pro-gramme. You cannot activate ordeactivate the options while aprogramme operates. If one or more options are set,make sure that the related indi-cators are on before the pro-gramme starts. 5.1 ExtraHygiene With this option you ha...

Page 9 - BEFORE FIRST USE; Adjusting the water softener

6. BEFORE FIRST USE 1. Make sure that the set level of thewater softener agrees with the waterhardness in your area. If not, adjustthe water softener. Contact your localwater authority to know the waterhardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the wa...

Page 10 - DAILY USE

6.2 Filling the salt container 1. Turn the cap counterclockwise andopen the salt container. 2. Put 1 litre of water in the salt con-tainer (only for the first time). 3. Fill the salt container with dishwash-er salt. 4. Remove the salt around the openingof the salt container. 5. Turn the cap clockwis...

Page 11 - Using the detergent; Setting and starting a; RESET

5. Set and start the correct programmefor the type of load and the degreeof soil. 7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quanti...

Page 12 - HINTS AND TIPS

Cancelling the programme 1. Press RESET . The display shows 2 horizontal status bars. Make sure that there is detergentin the detergent dispenser be-fore you start a new programme. At the end of the programme The display shows 0:00 and the end indi-cator comes on. 1. Press the on/off button to deact...

Page 13 - CARE AND CLEANING; Cleaning the filters

• Remove remaining food from the items. • To remove easily remaining burned food, soak pots and pans in water be-fore you put them in the appliance. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons withother cutle...

Page 14 - Cleaning the spray arms; TROUBLESHOOTING; Problem; The programme does not start.

6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filterscan cause bad washing resultsand damage to the appliance. 9.2 Cleaning the spray a...

Page 15 - Make sure that the water tap is not clogged.; If the washing and drying; Dishes are wet; How to activate the rinse; Rinse aid dispenser off.

Problem Possible solution Make sure that the pressure of the watersupply is not too low. For this information,contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose isnot clogged. Make sure that the inlet hose has no kinks orbends...

Page 16 - TECHNICAL INFORMATION; ENVIRONMENT CONCERNS

6. Adjust the released quantity of rinseaid. 7. Fill the rinse aid dispenser. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth(mm) 596 / 818 - 898 / 550 Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / ...