AEG FSE51600ZO - Manuals - manualsarea.com

Page 2 - FOR PERFECT RESULTS; CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INFORMATION...................................................................................... 3 2. SAFETY INSTRUCTIONS.................................................................................... 4 3. PRODUCT DESCRIPTION.....................................................

Page 3 - SAFETY INFORMATION

Subject to change without notice. 1. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a...

Page 4 - SAFETY INSTRUCTIONS

– by clients in hotels, motels, bed & breakfast and other residential type environments. • Do not change the specification of this appliance. • The operating water pressure (minimum and maximum) must be between 0.5 (50) / 10 (1000) bar (kPa) • Obey the maximum number of 15 place settings. • If t...

Page 5 - Electrical connection

• Do not install or use the appliance where the temperature is less than 0 °C. • Install the appliance in a safe and suitable place that meets installation requirements. www.youtube.com/electroluxwww.youtube.com/aeg How to install your 60 cm Dishwasher Sliding Hinge 2.2 Electrical connection WARNING...

Page 6 - PRODUCT DESCRIPTION; Product description

to withstand extreme physical conditions in household appliances, such as temperature, vibration, humidity, or are intended to signal information about the operational status of the appliance. They are not intended to be used in other applications and are not suitable for household room illumination...

Page 8 - PROGRAMME SELECTION; ExtraPower

5. PROGRAMME SELECTION 5.1 MY TIME MY TIME selection bar allows to select a suitable dishwashing cycle based on programme duration. C A B D E A. Quick is the shortest programme (30min) suitable for dishwashing a load with fresh and light soil. B. 1h is a programme suitable for dishwashing a load wit...

Page 9 - Consumption values

Programme Dishwasher load Degree of soil Programme phases EXTRAS 1h 30min Crockery, cutlery, pots, pans Normal, lightly dried-on • Dishwashing 60 °C • Intermediate rinse • Final rinse 55 °C • Drying• AirDry 1) • ExtraPower • GlassCare 2h 40min Crockery, cutlery, pots, pans Normal to heavy, dried- on...

Page 10 - Information for test institutes

Programme 1) 2) Water (l) Energy (kWh) Duration (min) Machine Care 8.9 - 10.9 0.60 - 0.72 60 1) The pressure and the temperature of the water, the variations of the mains supply, the options, thequantity of dishes and the degree of soil can change the values.2) The values for programmes other than E...

Page 12 - selection

AirDry is automatically activated with all programmes.The duration of the drying phase and the door opening time vary depending on the selected programme and options.When AirDry opens the door, the display shows the remaining time of the running programme. CAUTION! Do not try to close the appliance ...

Page 16 - CARE AND CLEANING; How to start the Machine

10. CARE AND CLEANING WARNING! Before any maintenance other than running the programme Machine Care, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms negatively affect the washing results. Check these elements regularly and, if necessa...

Page 17 - Cleaning the lower spray

2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 7. Reasse...

Page 21 - The product number; The dishwashing and drying results are not satisfactory

WARNING! We do not recommend using the appliance until the problem has been completely fixed. Unplug the appliance and do not plug it in again until you are certain that it operates correctly. 11.2 The product number code (PNC) If you contact an Authorised Service Centre, you need to provide the pro...

Page 22 - TECHNICAL INFORMATION

Problem Possible cause and solution Unusual foam during washing. • Use the detergent designed specifically for dishwash‐ ers. • Use a detergent from a different manufacturer. • Do not pre-rinse dishes under running water. Traces of rust on cutlery. • Silver and stainless steel cutlery were placed to...

Page 25 - ENVIRONMENTAL CONCERNS

Important Notice Before calling for service, please ensure that the steps listed in clause 8 above have been followed. SERVICE AUSTRALIA aeg.com/au FOR SERVICE or to find the address of your nearest au‐ thorised service centre in Australia PLEASE CALL 1300 363 664 OR EMAIL [email protected] For the ...