AEG FFS52610ZW- Manuals

Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION; Before the installation and use of the appliance,

CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. PRODUCT DESCRIPTION......................................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Do not leave the appliance with the open door unattended to avoid stepping accidentally onto it. • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket. • Do not use high pressure water sprays and/or steam to clean the appliance. • If the applian...

Page 5 - PRODUCT DESCRIPTION

WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are da...

Page 6 - CONTROL PANEL; Indicators

5 Rating plate 6 Salt container 7 Air vent 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 I...

Page 7 - PROGRAMMES

Indicator Description TimeSaver indicator. XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. Delay indicator. Door indicator. It comes on when the appliance door is open or is not cor-rectly closed. 5...

Page 8 - SETTINGS

5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) 9.9 0.921 240 7 - 12 0.7 - 1.5 45 - 160 13-15 1.4 - 1.6 140 - 160 9 0.8 30 13 - 14 0.9 - 1.1 70 - 85 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes ...

Page 9 - How to set the water softener

Water hardness German de- grees (°dH) French degrees (°fH) mmol/l Clarke de- grees Water softener lev- el 47 - 50 84 - 90 8.4 - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40 - 50 4.0 - 5.0 28 - 35 6 19 - 22 33 - ...

Page 10 - OPTIONS

How to deactivate the rinse aid empty notification The appliance must be in programme selection mode. 1. To enter the user mode, press and hold simultaneously Delay and Option until the indicators , and start flashing and the display is blank. 2. Press Start . • The indicators and are off. • The ind...

Page 11 - BEFORE FIRST USE; The salt container

Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deactivate one or more of them. Only the indicators of the options still active will stay on. 7.1 XtraDry Activate this option to boost the drying performance. With XtraDry o...

Page 12 - DAILY USE

How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it. 2. Put 1 litre of water in the salt container (Only for the first time). 3. Fill the salt container with dishwasher salt. 4. Remove the salt around the opening of the salt container. 5. Turn the cap ...

Page 14 - HINTS AND TIPS

Opening the door while the appliance operates Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. If the door is opened for more than 30 sec...

Page 16 - CARE AND CLEANING; Cleaning the filters

11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made...

Page 17 - TROUBLESHOOTING

CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 External cleaning • Clean th...

Page 19 - The washing and drying results are not satisfactory

Problem and alarm code Possible cause and solution The appliance trips the cir-cuit-beaker. • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage andthe capacity of the meter or turn off one of the applian-ces in use. • Internal electrical fault...

Page 21 - TECHNICAL INFORMATION; ENVIRONMENTAL CONCERNS

Refer to "Before first use" , "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 600 / 850 / 625 Electrical connection 1) Voltage (V) 200 - 240 Frequency (Hz) 50 / 60 Water supply pressure Min. / max. ba...