AEG FFE63806PM- Manuals

4. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Program button 4 Delay button 5 MyFavourite button 6 TimeSaver button 7 XtraDry button 8 ExtraHygiene button 9 Indicators 4.1 Indicators Indicator Description Salt indicator. It is on when the salt container needs refilling. Rinse aid in...

Programme Degree of soilType of load Programme phases Options P0 10) • No load • Self-cleaning 1) This programme offers the most efficient use of water and energy consumption for crockery and cut- lery with normal soil. This is the standard programme for test institutes. 2) The appliance senses the ...

Programme 1) Water (l) Energy (kWh) Duration (min) P7 12 - 14 0.8 - 1.0 82 - 92 P8 12 - 13 1.1 - 1.3 230 - 250 P9 4 0.1 14 P0 10 0.86 60 - 70 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Inform...

6.2 The water softener The water softener removes minerals from the water supply, which would have a negative effect on the washing results and on the appliance.The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener sho...

CAUTION! Do not try to close the appliance door within 2 minutes after automatic opening. This can cause damage to the appliance. If, afterwards, the door is closed for another 3 minutes, the running programme ends. AirDry is automatically activated with allprogrammes excluding (if applicable).To im...

automatically activated in next cycles. This configuration can be changed at any time. Every time is activated, XtraDry is off and needs to be chosen manually. Activating XtraDry deactivates TimeSaver and vice versa. How to activate XtraDry Press . The related indicator is on. The display shows the ...

3. Fill the salt container with dishwasher salt (until it is full). 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. 6. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water an...

CAUTION! Make sure that items do not stick out of the basket frame as it can cause damage to the items and the Comfort Lift mechanism. The Comfort Lift mechanism allows to lift the lower rack up (to the second rack level) and put it down to load and unload dishes easily.To load or unload the lower b...

10. HINTS AND TIPS 10.1 General Follow the hints below to ensure optimal cleaning and drying results in daily use and to help you protect the environment.• Remove larger residues of food from the dishes into the waste bin. • Do not pre-rinse dishes by hand. When needed, select a programme with a pre...

10.5 Before starting a programme Before you start the selected programme, make sure that:• The filters are clean and correctly installed. • The cap of the salt container is tight. • The spray arms are not clogged. • There is enough salt and rinse aid (unless you use multi-tablets). • The arrangement...

11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • To maint...

Refer to "Before first use" , "Daily use" , or "Hints and tips" for other possible causes. Once you have checked the appliance, deactivate and activate the appliance. If the problem occurs again, contact an Authorised Service Centre.For alarm codes not described in the table,...

Problem Possible cause and solution Traces of rust on cutlery. • There is too much salt in the water used for washing. Refer to "The water softener" . • Silver and stainless steel cutlery were placed together. Avoid putting silver and stainless steel items close to-gether. There are residues...

Water supply pressure bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 13 Power consumption Left-on mode (W) 5.0 Off-mode (W) 0.50 1) Refer to the rating plate for other values. 2) If the hot water comes ...