AEG FAVORIT 65040 I- Manuals

AEG FAVORIT 65040 I– User Manual in PDF format online.

Manuals:

User Manual

User Manual AEG FAVORIT 65040 I

Summary

Page 2 - General information and tips; Downloaded from DishWasher-Manual.com Manuals

CONTENTS 4 SAFETY INFORMATION6 PRODUCT DESCRIPTION7 CONTROL PANEL8 PROGRAMMES 10 OPTIONS11 BEFORE FIRST USE13 DAILY USE15 HINTS AND TIPS16 CARE AND CLEANING17 TROUBLESHOOTING18 TECHNICAL INFORMATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containe...

Page 3 - We recommend the use of original spare parts.

FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative technologies that helpmake life simpler – features you might not find on ordinary appliances. Please spenda few minutes reading to get the very best from ...

Page 4 - SAFETY INFORMATION; INSTALLATION; Only for UK and Ireland.

SAFETY INFORMATION Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. CHILDREN AND VULN...

Page 6 - PRODUCT DESCRIPTION

PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket 6 www.aeg.com Downloaded from DishWasher-Ma...

Page 7 - CONTROL PANEL; A B C; Washing phase indicator.

CONTROL PANEL 1 2 3 4 5 6 7 8 A B C 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Start button 7 Indicators 8 Option button Indicators Description Multitab indicator. ÖKO PLUS indicator. Washing phase indicator. Rinsing phase indicator. Drying phase indicator. En...

Page 8 - PROGRAMMES; Programme; ÖKO PLUS; Consumption values

PROGRAMMES Programme Degree of soilType of load Programmephases Options 1) AllCrockery, cutlery,pots and pans PrewashWash from 45 °C to 70°CRinsesDry ÖKO PLUS 2) Heavy soilCrockery, cutlery,pots and pans PrewashWash 70 °CRinsesDry ÖKO PLUS 3) Normal soilCrockery and cut-lery PrewashWash 50 °CRinsesD...

Page 9 - Information for test institutes; Write down the product number (PNC) that is on the rating plate.

Information for test institutes For all the necessary information for test performance. send an email to: [email protected] Write down the product number (PNC) that is on the rating plate. ENGLISH 9 Downloaded from DishWasher-Manual.com Manuals

Page 10 - OPTIONS; MULTITAB; multitab indicator comes on.

OPTIONS Activate or deactivate the optionsbefore the start of a programme.You cannot activate or deactivatethe options while a programmeoperates. If one or more options are set,make sure that the related indica-tors are on before the programmestarts. MULTITAB Activate this option only when you use t...

Page 11 - BEFORE FIRST USE; Fill the salt container.; ADJUSTING THE WATER SOFTENER; Manual adjustment

BEFORE FIRST USE 1. Make sure that the set level of the wa-ter softener agrees with the waterhardness in your area. If not, adjust thewater softener. Contact your local wa-ter authority to know the water hard-ness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the...

Page 12 - Electronic adjustment; Delay; FILLING THE SALT CONTAINER

Electronic adjustment 1. Press the on/off button to activate theappliance. 2. Make sure that the appliance is in set-ting mode. Refer to ‘SETTING ANDSTARTING A PROGRAMME’. 3. Press and hold Delay and Start at the same time until the indicators ( A ), ( B ) and ( C ) flash. 4. Press Program . • The i...

Page 13 - DAILY USE; USING THE DETERGENT; Setting mode

DAILY USE 1. Open the water tap. 2. Press the on/off button to activate theappliance. Make sure that the appli-ance is in setting mode, refer to ’SET-TING AND STARTING A PRO-GRAMME’.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispens...

Page 14 - Cancelling the programme; At the end of the programme; AUTO OFF

• The display shows the countdown of the delay start that decreases withsteps of 1 hour. • The phase indicators of the set pro- gramme go off. • When the countdown is completed, the programme starts.– The indicator of the phase in opera- tion comes on. Opening the door while theappliance operates If...

Page 15 - HINTS AND TIPS; THE WATER SOFTENER

HINTS AND TIPS THE WATER SOFTENER Hard water contains a high quantity ofminerals that can cause damage to theappliance and bad washing results. Thewater softener neutralises these minerals.The dishwasher salt keeps the water soft-ener clean and in good conditions. It isimportant to set the right lev...

Page 16 - CARE AND CLEANING; CLEANING THE FILTERS

CARE AND CLEANING WARNING! Before maintenance, deactivatethe appliance and disconnect themains plug from the mains socket. Dirty filters and clogged sprayarms decrease the washing re-sults.Make a check regularly and, ifnecessary, clean them. CLEANING THE FILTERS A B C C A1 A2 1. Turn the filter ( A ...

Page 17 - TROUBLESHOOTING; - The appliance does not fill with; Problem; • The released quantity of rinse aid is too

TROUBLESHOOTING The appliance does not start or it stopsduring operation.Before you contact the Service, refer tothe information that follows for a solutionto the problem. With some problems, the display showsan alarm code: • - The appliance does not fill with water. • - The appliance does not drain...

Page 18 - TECHNICAL INFORMATION

• The quantity of detergent is too much. Stains and dry water drops on glassesand dishes • The released quantity of rinse aid is not sufficient. Adjust the rinse aid selectorto a higher position. • The quality of the detergent can be the cause. Dishes are wet • The programme is without a drying phas...