AEG FAVORIT 34030VI- Manuals

Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable; Only for UK and Ireland.

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 5 - Indicators

2. PRODUCT DESCRIPTION 1 2 4 3 7 9 5 6 11 8 10 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Water hardness dial 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 3. CONTROL PANEL 2 1 3 4 5 B A 1 On/off button 2 Programme i...

Page 6 - PROGRAMMES; Programme; All; Information for test institutes

Indicators Description Wash indicator. Rinse aid indicator. This indicator is off while the programmeoperates. Salt indicator. This indicator is off while the programme oper-ates. 4. PROGRAMMES Programme 1) Degree ofsoilType of load Programmephases Duration(min) Energy(kWh) Water(l) 2) Heavy soilCro...

Page 7 - OPTIONS; Acoustic signals; BEFORE FIRST USE; Adjusting the water

5. OPTIONS 5.1 Acoustic signals The acoustic signals operate in theseconditions:• When the programme is completed.• A malfunction occurs to the appliance. Factory setting: on.You can deactivate the acousticsignals. Deactivating the acoustic signals1. Press the on/off button to activatethe appliance....

Page 8 - Manual adjustment

Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 51 - 70 91 - 125 9.1 - 12.5 64 - 88 2 1) 10 43 - 50 76 - 90 7.6 - 9.0 53 - 63 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 2 1) 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 2 1) 7 23 - 28 ...

Page 10 - DAILY USE; Loading the baskets

7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activatethe appliance. Make sure that the ap-pliance is in setting mode. Referto ’SETTING AND STARTING A PRO-GRAMME’.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispen...

Page 11 - A B; Combi detergent tablets

A B D 30 20 C M A X 1 2 3 4 + - B 2 0 0 3 A D C CAUTION! Use only detergents for dish-washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quantity of deter-gent in the compartment ( D )...

Page 12 - Cancelling the programme; At the end of the programme; CARE AND CLEANING

Starting a programme withoutdelay start 1. Open the water tap. 2. Press the on/off button to activatethe appliance. Make sure that the ap-pliance is in setting mode. 3. Press continuously the programmebutton until the indicator of the pro-gramme you want to set comes on. 4. Close the appliance door....

Page 13 - Cleaning the filters; Cleaning the spray arms; TROUBLESHOOTING

8.1 Cleaning the filters C B A 1. Turn the filter ( A ) counterclockwise and remove it. A1 A2 2. To disassemble the filter ( A ), pull apart ( A1 ) and ( A2 ). 3. Remove the filter ( B ). 4. Wash the filters with water. 5. Put the filter ( B ) to its initial position. Make sure that it assembles cor...

Page 15 - The washing results and drying results are not satisfactory; Problem; The filters are clogged.

After the checks are completed, activatethe appliance. The programme contin-ues from the point of interruption.If the problem occurs again, contact theService. If other alarm codes show, contact theService. 9.1 The washing results and drying results are not satisfactory Problem Possible cause Possib...

Page 16 - TECHNICAL INFORMATION; ENVIRONMENT CONCERNS

Problem Possible cause Possible solution The quantity of detergentwas too much. Make sure that you add thecorrect quantity of deter-gent in the dispenser be-fore you start a programme. Dry water dropstains on glassesand dishes. The released quantity ofrinse aid was not suffi-cient . Increase the rel...