AEG F988709M0P- Manuals

4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Rinsing phase. It comes on when the rinsing p...

5. PROGRAMMES Programme Degree of soilType of load Programme phases Options P1 1) • Normal soil• Crockery and cutlery • Prewash• Wash 50 °C• Rinses• Dry • Sanitize• TimeSaver• XtraDry P2 2) • All• Crockery, cut- lery, pots andpans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • Sanitize• XtraDry...

5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) P1 11 0.961 225 P2 7 - 14 0.6 - 1.6 40 - 160 P3 14 - 16 1.2 - 1.5 139 - 155 P4 12.5 - 14.5 1.4 - 1.8 169 - 179 P5 12 - 14 0.7 - 0.9 75 - 85 Px 9.5 - 10.5 1.10 - 1.30 55 - 65 P6 10 0.9 30 P8 9 - 10 1.1 - 1.3 219 - 229 1) The pr...

When you activate the appliance, usually it is in programme selection mode. However, if this does not happen, you can set the programme selection mode in the following way:Press and hold simultaneously Delay and Option until the appliance is in programme selection mode. 6.2 The water softener The wa...

7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deact...

hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start a programme to remove any processing residuals that can still be inside the appliance. Do not use detergent and do not load the b...

Fill the rinse aid dispenser when the indicator ( A ) becomes clear. If you use multi-tablets and the drying performance is satisfactory, the rinse aid refill indication can be disabled. We recommend to always use rinse aid for better drying performance, also in combination with multi- tablets conta...

Starting a programme with delay start 1. Set a programme. 2. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). 3. Press Start to start the countdown. • The delay indicator comes on to confirm the start of the countdown. • The countdown starts to...

At the end of the program water can still remain on the sides and on the door of the appliance. 11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spray arms decrease the washing results. Make a ch...

11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you use short duration programmes regularly, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend running long duration progra...

12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use" , "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes.• Clean spray arm jets and filter. Refer to "Care and C...

Problem Possible cause and solution There are residues of deter-gent in the dispenser at theend of the programme. • The detergent tablet got stuck in the dispenser and therefore was not completely washed away by water. • Water cannot wash away the detergent from the dis- penser. Make sure that the s...

Power consumption Off-mode (W) 0.10 1) Refer to the rating plate for other values. 2) If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 14. ENVIRONMENTAL CONCERNS Recycle the materials with the symb...