Page 2 - CONTENTS; Contents
Rev 0.0 3 CONTENTS EN Contents 1 INTRODUC TION ....................................................................................................................... 5 2 SAFET Y INFORMATION .......................................................................................................... 7 ...
Page 3 - INTRODUCTION; This manual comprises the following sections:; INSTALLATION INSTRUCTIONS: for the; Nomenclature of fi gures and tables:
Rev 0.0 5 INTRODUCTION EN 1 INTRODUCTION Thank you for choosing one of our products. To install this dishwasher cor-rectly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to installation of the appli-ance. The texts are easy to under...
Page 4 - Symbols used in this manual; DANGER OF ELECTROCUTION.
6 Rev 0.0 INTRODUCTION EN Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or damage the appliance. DANGER OF ELECTROCUTION. This symbol highlights information and warnings of an electrical natu...
Page 5 - WARNINGS; SAFET Y INFORMATION; ING AND DRYING OF DISHES
Rev 0.0 7 WARNINGS EN 2 SAFET Y INFORMATION THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE AND MUST THEREFORE BE KEPT INTACT TOGETHER WITH THE MACHINE. BE-FORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUCTIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNI...
Page 6 - DO NOT ATTEMPT TO REPAIR THE APPLIANCE.
8 Rev 0.0 WARNINGS EN T WO PEOPLE WEARING SAFET Y GLOVES ARE REQUIRED TO LIFT THE DISHWASHER. DO NOT LEAVING DISCARDED PACKAGING MATERIALS UNSUPERVISED WITHIN THE HOME. SEPARATE THE VARIOUS PACKAGING MATERI-ALS AND TAKE THEM TO THE NEAREST SORTED WASTE COLLECTION CENTRE. KEEP CHILDREN, PHYSICALLY AN...
Page 8 - INSTALLATION INSTRUCTIONS; INSTALLATION
10 Rev 0.0 INSTALLATION INSTRUCTIONS EN 3 INSTALLATION MATERIAL To install the dishwasher correctly, the following materials are required: Phillips screwdriver (ref. A fi g. 3-01); • spirit level (ref. B fi g. 3-01); • tape measure (ref. C fi g. 3-01); • compass saw (ref. D fi g. 3-01); • pencil (re...
Page 9 - supplied with dishwasher; The kit supplied with the dishwasher comprises:
Rev 0.0 11 INSTALLATION INSTRUCTIONS EN 3.1 Kit supplied with dishwasher (models F65478VI-S / F89078VI-S) The kit supplied with the dishwasher comprises: adhesive steam guard (ref. A fi g. 3-02); • 1 steel steam guard (ref. B fi g. 3-02);* • 1 template for door panel (ref. C fi g. 3-02); • 2 hooks f...
Page 10 - DIMENSIONS OF DISHWASHER
12 Rev 0.0 INSTALLATION INSTRUCTIONS EN 4 DIMENSIONS OF DISHWASHER (See fi g. 4-01) Model A (height) B (width) C (depth) F89078VI-M 86 cm ÷ 91 cm 33-55/64” ÷ 35-55/64” 59.7 cm ÷ 59,9 cm 23-1/2” ÷ 23-37/64” 57 cm 22-7/16” F89078VI-S 86 cm ÷ 91 cm 33-55/64” ÷ 35-55/64” 59.7 cm ÷ 59.9 cm 23-1/2” ÷ 23-3...
Page 11 - INSTALLATION AND HOOK-UP; BUILDING-IN A DISHWASHER UNDERNEATH A CERAMIC HOB IS; Only for free-standing models; from specialized retailers
Rev 0.0 13 INSTALLATION INSTRUCTIONS EN 5 INSTALLATION AND HOOK-UP DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE. Remove the polystyrene rack blocks. Position the appliance in the chosen instal-lation position. The sides and rear of the appliance can lie a...
Page 15 - Connecting to the water supply; PREVENTING THE RISK OF CLOGGING OR DAMAGE:
Rev 0.0 17 INSTALLATION INSTRUCTIONS EN A through hole with a diameter of at least 8 cm (5/32”) is required to pass the hoses and power cord (ref. A fi g. 5-05).Make sure there area no rough edges that could damage the power cord or hoses. If the dishwasher is installed in a metal unit protect the e...
Page 16 - Firmly secure the hose by tightening the relative ring nut; ciency will be slightly impaired. Make the connection to the
18 Rev 0.0 INSTALLATION INSTRUCTIONS EN 5.2.1.1 Connecting to the water tap Connect the inlet hose to a threaded ¾” gas cold water tap, fi tting the supplied fi lter (ref. A fi g. 5-06). Firmly secure the hose by tightening the relative ring nut with your hands (ref. B fi g. 5-06); fi nish by tighte...
Page 18 - Connecting to a drain; Insert the relative hose into a drain with a minimum diameter of
20 Rev 0.0 INSTALLATION INSTRUCTIONS EN 5 .2.1.2 Connecting the drain hose Connecting to a drain Insert the relative hose into a drain with a minimum diameter of 4 cm (1-37/64”) (ref. A fi g. 5-09); alternatively, place the hose on the sink (ref. B fi g. 5-09) using the supplied hose support (see fi...
Page 19 - Connecting to a “T” union of the drain circuit
Rev 0.0 21 INSTALLATION INSTRUCTIONS EN Connecting to a “T” union of the drain circuit MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Connect the dishwasher drain hose (ref. A fi g. 5-11) to the “T...
Page 20 - Connecting to a waste disposal unit with an air gap
22 Rev 0.0 INSTALLATION INSTRUCTIONS EN Connecting to a waste disposal unit with an air gap MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Remove the cover of the waste disposal unit (ref. A fi g. ...
Page 21 - Connecting to the air gap (no waste disposal unit)
Rev 0.0 23 INSTALLATION INSTRUCTIONS EN Connecting to the air gap (no waste disposal unit) MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Connect the dishwasher drain hose (ref. A fi g. 5-13) to th...
Page 22 - Connecting to a waste disposal unit (no air gap)
24 Rev 0.0 INSTALLATION INSTRUCTIONS EN Connecting to a waste disposal unit (no air gap) MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN LINE AND AT LEAST 400 mm (15-3/4”) ABOVE THE FLOOR ON WHICH THE DISHWASHER WILL BE INSTALLED. Remove the cover of the waste disposal unit (ref. A fi g. 5-1...
Page 23 - Electrical connections and warnings; IN THE EVENT OF DAMAGE TO THE SUPPLY CORD,; Grounding instructions
Rev 0.0 25 INSTALLATION INSTRUCTIONS EN 5 .2.2 Electrical connections and warnings CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON THE INNER EDGE OF THE DOOR. IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT RE- PLACED BY THE...
Page 24 - Never remove the plug; If the power cord is damaged, have it replaced by the; Commissioning; Installation procedure
26 Rev 0.0 INSTALLATION INSTRUCTIONS EN The plug at the end of the power cord and the corresponding socket must be of the same type and must conform to current regulations governing electrical ap-pliances. The plug must be accessible after installation. Never remove the plug by pulling on the wire. ...
Page 26 - Procedure for mounting the door panel
28 Rev 0.0 INSTALLATION INSTRUCTIONS EN 5.3.2 Procedure for mounting the door panel Mount the door panel.Place the template on the inner surface of the panel, centering it along the upper side and matching up the reference locators (ref. A fi g. 5-19); mark the position of the door hooks with a penc...
Page 27 - the screws are not supplied.
Rev 0.0 29 INSTALLATION INSTRUCTIONS EN Drill holes for the panel handle using a drill with a suitable bit. Use the screwdriver to secure the door handle before hooking the panel to the dishwasher (see fi g. 5-21). N.B.: the screws are not supplied. Insert the door spacers contained in the accessory...
Page 34 - email
Q - Warranty AEG products are designed and built to the highest standards. We expect your appliances to provide many years of trouble free enjoyment. In the event of an appliance requiring attention, each appliance is covered by a 2 year warranty from the date of purchase. Refer to warranty policy f...
Page 35 - For more information visit
AEG appliances are imported and distributed in North America by Euro-Line Appliances Inc. For more information visit www.euro-line-appliances.com / www.elawest.com 871 Cranberry Court Oakville, ON L6L 6J7 Canada Toll Free: 1.800.421.6332 Showroom: 905.829.3980 [email protected] 2912...