AEG F88709W0P- Manuals

Page 2 - reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.

CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................

Page 4 - Installation

1.2 Children and vulnerable people safety • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a...

Page 5 - PRODUCT DESCRIPTION

WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are dangerous. Obey the safety...

Page 6 - CONTROL PANEL; Indicators

5 Rating plate 6 Salt container 7 Air vent 8 Rinse aid dispenser 9 Detergent dispenser 10 Lower basket 11 Upper basket 12 Cutlery drawer 4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program touchpad 3 Programme indicators 4 Display 5 Delay touchpad 6 Option touchpad 7 Indicators 8 Start touchp...

Page 7 - PROGRAMMES

Indicator Description TimeSaver indicator. Delay indicator. ExtraHygiene indicator. 5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • ExtraHygiene• TimeSaver• Multitab 2) • All• Crockery, cutlery,...

Page 8 - Consumption values; Information for test

Programme Degree of soilType of load Programme phases Options 6) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • Multitab 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard...

Page 9 - SETTINGS; Programme selection; How to set the programme; The water softener

6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme selection mode it is possible to set a programme and to enter the user mode. In user mode, the following settings can be changed: • The level of the water softener according to the water hardness. • The deactiv...

Page 13 - DAILY USE

9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in user mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent....

Page 14 - HINTS AND TIPS

the running phase comes on. The delay indicator goes off. Opening the door while the appliance operates If you open the door while a programme is running, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countd...

Page 16 - CARE AND CLEANING; Cleaning the filters

11. CARE AND CLEANING WARNING! Before maintenance, deactivate the appliance and disconnect the mains plug from the main socket. Dirty filters and clogged spay arms decrease the washing results. Make a check regularly and, if necessary, clean them. 11.1 Cleaning the filters The filter system is made ...

Page 17 - TROUBLESHOOTING

7. Reassemble the filters ( B ) and ( C ). 8. Put back the filter ( B ) in the flat filter ( A ). Turn it clockwise until it locks. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. 11.2 Cleaning the spray arms Do not remove the spray arms. If t...

Page 18 - The washing and drying results are not satisfactory

Problem and alarm code Possible solution The programme does notstart. • Make sure that the appliance door is closed.• Press Start . • If the delay start is set, cancel the setting or wait for the end of the countdown. • The appliance has started the procedure to recharge the resin inside the water s...

Page 19 - TECHNICAL INFORMATION; ENVIRONMENTAL CONCERNS

13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 850 / 610 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 15 Power consum...