AEG F76672M0P- Manuals

Page 2 - reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.

CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the appliance door open without supervision to prevent to fall on it. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. •...

Page 6 - PRODUCT DESCRIPTION

3. PRODUCT DESCRIPTION 5 4 6 8 7 11 2 3 1 10 9 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 3.1 Beam-on-Floor The Beam-on-Floor is a light that shows on the kitchen...

Page 7 - CONTROL PANEL; Indicators; PROGRAMMES

4. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Program button 4 Delay button 5 MyFavourite button 6 TimeSaver button 7 XtraDry button 8 ExtraHygiene button 9 Indicators 4.1 Indicators Indicator Description Rinse aid indicator. It is always off while the programme operates. 5. PROGRAM...

Page 8 - Consumption values

Programme Degree of soilType of load Programme phases Options P5GLASS • Normal or light soil • Delicate crock- ery and glass-ware • Wash 45 °C• Rinses• Dry • XtraDry P630MIN 5) • Fresh soil• Crockery and cutlery • Wash 60 °C• Rinses • ExtraHygiene• XtraDry P7PREWASH 6) • All • Prewash P8EXTRA SILENT...

Page 9 - SETTINGS

Programme 1) Water (l) Energy (kWh) Duration (min) P5GLASS 13 - 13.5 0.7 - 0.9 60 - 70 P630MIN 9 0.8 30 P7PREWASH 4 0.1 14 P8EXTRA SILENT 9.0 - 10.5 1.0 - 1.2 210 - 220 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can ch...

Page 11 - OPTIONS

How to activate the acoustic signal for the end of programme The appliance must be in programme selection mode. 1. To enter the user mode, press andhold simultaneously and until the indicators , and start to flash and the display is blank. 2. Press . • The indicators and go off. • The indicator cont...

Page 12 - How to fill the rinse aid; DAILY USE

8. OPTIONS Desired options must be activated every time before you start a programme (except for Multitab). It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance wi...

Page 14 - HINTS AND TIPS

If the door is opened for more than 30 seconds during the drying phase, the running programme will end. Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again. Press and hold simultaneously and until the appliance is in...

Page 15 - CARE AND CLEANING; Cleaning the filters

• Put hollow items (cups, glasses and pans) with the opening down. • Make sure that glasses do not touch other glasses. • Put cutlery and small items in the cutlery basket. • Put light items in the upper basket. Make sure that the items do not move. • Make sure that the spray arms can move freely be...

Page 17 - TROUBLESHOOTING

4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until it locks into place. 12.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do n...

Page 19 - The washing and drying results are not satisfactory

Problem and alarm code Possible solution The appliance trips the cir-cuit-beaker. • The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage andthe capacity of the meter or turn off one of the applian-ces in use. • Internal electrical fault of the ap...

Page 21 - TECHNICAL INFORMATION; INSTALLATION

14. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596/ 818 - 878 / 570 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Wattage (W) 1950 Water supply pressure bar (minimum and maximum) 0.5 - 8 kPa (minimum and maximum) 50 - 800 Water supply Cold water or hot water 2) m...

Page 25 - Water drain hose; WARRANTY

Water drain hose The highest point of the drain hose must be no more than 600 mm from the floor and must have a continuous fall to the plumbing connection.The drain hose can be lengthened using additional lengths and connectors. These must be purchased from Electrolux Spare Parts. The extension leng...

Page 28 - ENVIRONMENT CONCERNS

FOR SERVICE or to find the address of your nearest authorised service centre in New Zealand FREE CALL 0800 10 66 10OR EMAIL [email protected] (New Zealand only) FOR SPARE PARTS or to find the address of your nearest state spare parts centre in New Zealand FREE CALL 0800 10 66 20OR EMAIL ...