AEG F66792W0P- Manuals

4. CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Program button 4 Delay button 5 MyFavourite button 6 TimeSaver button 7 Multitab button 8 RESET button 9 Indicators 4.1 Indicators Indicator Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. ...

Programme Degree of soilType of load Programme phases Options P4PRO 4) • Heavy soil• Crockery, cut- lery, pots andpans • Prewash• Wash 70 °C• Rinses• Dry • TimeSaver• Multitab P5GLASS • Normal or light soil • Delicate crock- ery and glass-ware • Wash 45 °C• Rinses• Dry • Multitab P630MIN 5) • Fresh ...

Programme 1) Water (l) Energy (kWh) Duration (min) P3PROZONE 14 - 16 1.2 - 1.5 139 - 149 P4PRO 12.5 - 14.5 1.4 - 1.6 154 - 164 P5GLASS 12 - 14 0.7 - 0.9 75 - 85 P630MIN 10 0.9 30 P7PREWASH 4 0.1 14 P8EXTRA SILENT 9 - 10 1.0 - 1.2 219 - 229 1) The pressure and the temperature of the water, the variat...

The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results. Water hardness German de- grees...

6.6 Acoustic signals Acoustic signals sound when a malfunction of the appliance occurs. It is not possible to deactivate these acoustic signals.There is also an acoustic signal that sounds when the programme is completed. By default this acoustic signal is deactivated but it is possible to activate ...

7.2 Multitab Activate this option when you use multi- tablets that integrate the salt, rinse aid and detergent functions. They can also contain other cleaning or rinsing agents.This option deactivates the release of salt. The salt indicator does not come on.This option also deactivates the release o...

4. Remove the salt around the opening of the salt container. 5. Turn the cap of the salt container clockwise to close the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. 8.2 ...

Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again.Press and hold RESET until the appliance is in programme selection mode. Cancelling the programme Press and hold RESET until the appliance is in programme selection...

10.3 What to do if you want to stop using multi-tablets Before you start to use separately detergent, salt and rinse aid do the following procedure. 1. Set the highest level of the water softener. 2. Make sure that the salt and rinse aid containers are full. 3. Start the shortest programme with a ri...

11.2 Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abras...

For alarm codes not described in the table, contact an Authorised Service Centre. 12.1 The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks orbluish layers on glasses anddishes. • The release quantity of rinse aid is too much. Adjust the rinse aid s...