Page 2 - KLANTENSERVICE
INHOUDSOPGAVE 1. VEILIGHEIDSINFORMATIE.......................................................................................3 2. VEILIGHEIDSVOORSCHRIFTEN.............................................................................. 4 3. BESCHRIJVING VAN HET PRODUCT.....................................
Page 4 - VEILIGHEIDSVOORSCHRIFTEN; Montage
gekwalificeerd persoon deze vervangen teneinde gevaarlijke situaties te voorkomen. • Doe messen en bestek met scherpe punten in het bestekmandje met de punten omlaag in horizontale positie. • Laat de deur van het apparaat niet open staan zonder toezicht om te voorkomen dat er iemand over struikelt. ...
Page 6 - BESCHRIJVING VAN HET PRODUCT
3. BESCHRIJVING VAN HET PRODUCT 13 6 5 9 10 7 3 4 2 1 11 8 12 1 Bovenblad 2 Top sproeiarm 3 Bovenste sproeiarm 4 Onderste sproeiarm 5 Filters 6 Typeplaatje 7 Zoutreservoir 8 Luchtopening 9 Glansmiddeldoseerbakje 10 Afwasmiddeldoseerbakje 11 Bestekkorf 12 Onderkorf 13 Bovenkorf www.aeg.com 6
Page 7 - BEDIENINGSPANEEL; Indicatielampjes
4. BEDIENINGSPANEEL 1 2 4 5 6 8 3 7 1 Aan/uit-toets 2 Program -toets 3 Programma-indicatielampjes 4 Weergave 5 Delay -toets 6 Option -toets 7 Indicatielampjes 8 Start -toets 4.1 Indicatielampjes Aanduiding Omschrijving Wasfase. Gaat aan wanneer de wasfase loopt. Spoelfase. Gaat aan wanneer de spoelf...
Page 8 - PROGRAMMA’S; Verbruikswaarden
5. PROGRAMMA’S Programma Mate van vervuilingType belading Programmafasen Opties 1) • Normaal bevuild• Serviesgoed en bestek • Voorspoelen• Wassen 50 °C• Spoelgangen• Drogen • ExtraHygiene• TimeSaver• Multitab 2) • Alles• Serviesgoed, bes- tek en pannen • Voorspoelen• Wassen van 45 °C tot 70 °C • Spo...
Page 9 - INSTELLINGEN
Programma 1) Water (l) Energie (kWh) Bereidingsduur (min) 7 - 14 0.6 - 1.4 40 - 150 12.5 - 14.5 1.4 - 1.6 154 - 164 12 - 14 0.7 - 0.9 75 - 85 10 0.9 30 9 - 10 1.0 - 1.2 219 - 229 1) De druk en temperatuur van het water, de variaties in stroomtoevoer, de opties en de hoeveelheid vaat kan de verbruiks...
Page 11 - OPTIES
en gaan knipperen en het display blanco is. 2. Druk op Delay . • De indicatielampjes en gaan uit. • Blijft het indicatielampje knipperen • Het display toont de huidige instelling: bijv. = niveau 4. – De glansmiddelniveaus lopen van 0A tot 6A. – Niveau 0 = er wordt geen glansmiddel gebruikt. 3. Druk ...
Page 14 - DAGELIJKS GEBRUIK
9. DAGELIJKS GEBRUIK 1. Draai de waterkraan open. 2. Druk op de aan-/uittoets om het apparaat te activeren. Zorg dat het apparaat in de programmakeuzemodus staat. • Vul het zoutreservoir als het zoutindicatielampje brandt. • Vul het glansmiddeldoseerbakje als het indicatielampje van het glansmiddel ...
Page 15 - AANWIJZINGEN EN TIPS
Als het aftellen klaar is, start het programma en gaat het indicatielampje van de lopende fase branden. Het lampje uitgestelde start gaat uit. De deur openen als het apparaat in werking is Als u de deur opent terwijl een programma loopt, stopt het apparaat. Als u de deur weer sluit, gaat het apparaa...
Page 17 - ONDERHOUD EN REINIGING; De filters reinigen
11. ONDERHOUD EN REINIGING WAARSCHUWING! Schakel het apparaat uit en trek de stekker uit het stopcontact voordat u onderhoudshandelingen verricht. Vuile filters en verstopte sproeiarmen verminderen de wasresultaten. Controleer regelmatig de filters en reinig deze zo nodig. 11.1 De filters reinigen H...
Page 19 - PROBLEEMOPLOSSING
progamma's met een lange duur te gebruiken. • Om de prestaties van uw apparaat op en top te houden raden we u aan iedere maand een specifiek schoonmaakproduct voor vaatwasmachines te gebruiken. Volg de instructies op de verpakking van de producten zorgvuldig op. 12. PROBLEEMOPLOSSING Het apparaat st...
Page 21 - De was- en droogresultaten zijn niet naar tevredenheid
12.1 De was- en droogresultaten zijn niet naar tevredenheid Probleem Mogelijke oorzaak en oplossing Slechte wasresultaten. • Raadpleeg "Dagelijks gebruik" , "Aanwijzingen en tips" en de folder voor het laden van de korf. • Gebruik intensievere wasprogramma´s.• Schakel altijd de optie...
Page 22 - TECHNISCHE INFORMATIE
Probleem Mogelijke oorzaak en oplossing Er bevinden zich aan het eindevan het programma resten vanvaatwasmiddel in het vaatwas-middeldoseerbakje. • De vaatwastablet raakte klem in het vaatwasmiddeldo- seerbakje en is daardoor niet volledig weggespoelddoor het water. • Het water kan het vaatwasmiddel...
Page 23 - MILIEUBESCHERMING
14. MILIEUBESCHERMING Recycle de materialen met het symbool . Gooi de verpakking in een geschikte verzamelcontainer om het te recyclen. Help om het milieu en de volksgezondheid te beschermen en recycle het afval van elektrische en elektronische apparaten. Gooi apparaten gemarkeerd met het symbool ni...
Page 24 - CUSTOMER CARE AND SERVICE
CONTENTS 1. SAFETY INFORMATION.........................................................................................25 2. SAFETY INSTRUCTIONS........................................................................................ 26 3. PRODUCT DESCRIPTION.............................................
Page 26 - SAFETY INSTRUCTIONS; Installation
• Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the appliance door open without supervision to prevent to fall on it. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. •...
Page 27 - PRODUCT DESCRIPTION
WARNING! Dangerous voltage. • If the water inlet hose is damaged, immediately disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • Do not sit or stand on the open door. • Dishwasher detergents are dangerous. Obey the safety...
Page 28 - CONTROL PANEL; Indicators
5 Filters 6 Rating plate 7 Salt container 8 Air vent 9 Rinse aid dispenser 10 Detergent dispenser 11 Cutlery basket 12 Lower basket 13 Upper basket 4. CONTROL PANEL 1 2 4 5 6 8 3 7 1 On/off button 2 Program button 3 Programme indicators 4 Display 5 Delay button 6 Option button 7 Indicators 8 Start b...
Page 29 - PROGRAMMES
Indicator Description Rinse aid indicator. It is always off while the programme operates. TimeSaver indicator. Delay indicator. ExtraHygiene indicator. 5. PROGRAMMES Programme Degree of soilType of load Programme phases Options 1) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• ...
Page 30 - Consumption values; Information for test; SETTINGS; Programme selection
Programme Degree of soilType of load Programme phases Options 5) • Normal soil• Crockery and cut- lery • Prewash• Wash 50 °C• Rinses• Dry • Multitab 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard...
Page 31 - How to set the water softener
• The deactivation of the rinse aid dispenser when you want to use the Multitab option without rinse aid. • The level of rinse aid according to the required dosage. These settings will be saved until you change them again. How to set the programme selection mode The appliance is in programme selecti...
Page 35 - DAILY USE
9. DAILY USE 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in programme selection mode. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add...
Page 36 - HINTS AND TIPS
the running phase comes on. The delay indicator goes off. Opening the door while the appliance operates If you open the door while a programme is running, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countd...
Page 37 - CARE AND CLEANING
drying results with the use of multi- tablets. • Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use the tablets with long programmes. • Do not use more than the correct quantity of detergent. Refer to the instructi...
Page 38 - Cleaning the filters
11.1 Cleaning the filters The filter system is made of 3 parts. C B A 1. Turn the filter ( B ) counterclockwise and remove it. 2. Remove the filter ( C ) out of filter ( B ). 3. Remove the flat filter ( A ). 4. Wash the filters. 5. Make sure that there are no residues of food or soil in or around th...
Page 39 - TROUBLESHOOTING
11.2 Cleaning the upper spray arm We recommend to clean regularly the upper spray arm to avoid soil to clog the holes.Clogged holes can cause unsatisfactory washing results. 1. Pull out the upper basket. 2. To disengage the spray arm from the basket, press the spray arm upwards in the direction indi...
Page 41 - The washing and drying results are not satisfactory
Problem and alarm code Possible cause and solution Small leak from the appli-ance door. • The appliance is not level. Loosen or tighten the adjust- able feet (if applicable). • The appliance door is not centred on the tub. Adjust the rear foot (if applicable). The appliance door is diffi-cult to clo...
Page 42 - TECHNICAL INFORMATION
Problem Possible cause and solution The dishes are wet. • The programme does not have a drying phase or has a drying phase with low temperature. • The rinse aid dispenser is empty.• The quality of the rinse aid can be the cause.• The quality of the multi-tablets can be the cause. Try a different bra...
Page 43 - ENVIRONMENT CONCERNS
Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 / 60 Water supply pressure bar (minimum and maximum) 0.5 - 8 MPa (minimum and maximum) 0.05 - 0.8 Water supply Cold water or hot water 2) max 60 °C Capacity Place settings 13 Power consumption Left-on mode (W) 0.99 Power consumption Of...