Page 2 - reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.
CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................
Page 4 - SAFETY INSTRUCTIONS; Installation
• Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the appliance door open without supervision to prevent to fall on it. • Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the s...
Page 5 - PRODUCT DESCRIPTION
• Ensure that there are no visible water leaks during and after the first use of the appliance. • If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. Contact the Authorised Service Centre to replace the water inlet hose. 2.4 Use • ...
Page 6 - CONTROL PANEL; Indicators; PROGRAMMES
11 Upper basket 12 Cutlery drawer 3.1 Beam-on-Floor The Beam-on-Floor is a light that is displayed on the floor below the appliance door.• When the programme starts, a red light comes on and stays on for the duration of the programme. • When the programme is completed, a green light comes on. • When...
Page 7 - Consumption values
Programme Degree of soilType of load Programme phases Options P2 2) • All• Crockery, cut- lery, pots andpans • Prewash• Wash from 45 °C to 70 °C • Rinses• Dry • XtraDry P4 3) • Heavy soil• Crockery, cut- lery, pots andpans • Prewash• Wash 70 °C• Rinses• Dry • TimeSaver• XtraDry P6 • Normal or light ...
Page 8 - SETTINGS
5.2 Information for test institutes For all the necessary information for test performance, send an email to: [email protected] Write down the product number (PNC) that is on the rating plate. 6. SETTINGS 6.1 Programme selection mode and user mode When the appliance is in programme...
Page 10 - OPTIONS
you always use rinse aid for best drying performance.If you use standard detergent or multi- tablets without rinse aid, activate the notification to keep the rinse aid refill indicator active. How to deactivate the rinse aid empty notification The appliance must be in programme selection mode. 1. To...
Page 11 - BEFORE FIRST USE
7.1 XtraDry Activate this option when you want to boost the drying performance. With the use of this option, the duration of some programmes, water consumption and the last rinse temperature can be affected.The option XtraDry is not a permanent option and must be selected at every cycle. How to acti...
Page 12 - DAILY USE
5. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion. 8.2 How to fill the rinse aid dispenser A B C CAUTION! Only...
Page 14 - HINTS AND TIPS
Cancelling the programme Press and hold Reset until the appliance is in programme selection mode. Make sure that there is detergent in the detergent dispenser before you start a new programme. End of programme When the programme is completed and you open the door, the appliance is automatically deac...
Page 15 - CARE AND CLEANING; Cleaning the filters
• Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons with other cutlery. • Make sure that glasses do not touch other glasses. • Put small items in the cutlery basket...
Page 17 - TROUBLESHOOTING
4. To engage again the spray arm to the basket, press the spray arm upwards in the direction indicated by the lower arrow and simultaneously turn it counterclockwise until it locks into place. 11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do n...
Page 19 - The washing and drying results are not satisfactory
Problem and alarm code Possible cause and solution Rattling/knocking soundsfrom inside the appliance. • The tableware is not properly arranged in the baskets. Refer to basket loading leaflet. • Make sure that the spray arms can rotate freely. The appliance trips the cir-cuit-beaker. • The amperage i...
Page 21 - TECHNICAL INFORMATION; ENVIRONMENT CONCERNS
Refer to "Before first use" , "Daily use" or "Hints and tips" for other possible causes. 13. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818-898 / 550 Electrical connection 1) Voltage (V) 220 - 240 Frequency (Hz) 50 Water supply pressure bar (minimum an...