AEG F55412VI0- Manuals

Page 2 - reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.

CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position. • Do not keep the appliance door open without supervision to prevent to fall on it. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. •...

Page 6 - PRODUCT DESCRIPTION

3. PRODUCT DESCRIPTION 4 3 7 9 8 10 5 6 11 1 2 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Air vent 7 Rinse aid dispenser 8 Detergent dispenser 9 Cutlery basket 10 Lower basket 11 Upper basket 3.1 Beam-on-Floor The Beam-on-Floor is a light that shows on the kitche...

Page 7 - CONTROL PANEL; Indicators; PROGRAMMES

4. CONTROL PANEL 1 2 4 3 5 1 On/off button 2 Display 3 Delay button 4 Programme buttons 5 Indicators 4.1 Indicators Indicator Description Multitab indicator. Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5. PROGRAMM...

Page 8 - Consumption values; Information for test; SETTINGS; Programme selection

Programme Degree of soilType of load Programme phases Options 5) • All • Prewash 1) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. (This is the standard programme for test institutes). 2) The appliance senses the degree ...

Page 9 - How to set the water softener

How to set the programme selection mode The appliance is in programme selection mode when the programme indicator is on and the display shows the programme duration.When you activate the appliance, usually it is in programme selection mode. However, if this does not happen, you can set the programme...

Page 11 - OPTIONS; Multitab; BEFORE FIRST USE; The salt container

7. OPTIONS Desired options must be activated every time before you start a programme. It is not possible to activate or deactivate options while a programme is running. Not all options are compatible with each other. If you have selected non compatible options, the appliance will automatically deact...

Page 12 - DAILY USE; Using the detergent

5. Turn the cap of the salt container clockwise to close the salt container. Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme. 8.2 How to fill the rinse aid dispenser A B D C M A X 1 2 3 4 + -...

Page 14 - HINTS AND TIPS

End of the programme When the programme is completed the display shows 0:00 . 1. Press the on/off button or wait for the Auto Off function to automatically deactivate the appliance. 2. Close the water tap. 10. HINTS AND TIPS 10.1 General The following hints will ensure optimal cleaning and drying re...

Page 15 - CARE AND CLEANING; Cleaning the filters

• Do not put in the appliance items that can absorb water (sponges, household cloths). • Remove remaining food from the items. • Make soft the remaining burned food on the items. • Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond togeth...

Page 17 - TROUBLESHOOTING

• If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. • To maintain the performance of your appliance at its best, we recommend to use monthly ...

Page 18 - The washing and drying results are not satisfactory

Problem and alarm code Possible cause and solution The appliance stops andstarts more times during op-eration. • It is normal. It provides optimal cleaning results and en- ergy savings. The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of ...

Page 20 - TECHNICAL INFORMATION; ENVIRONMENT CONCERNS

Problem Possible cause and solution Dull, discoloured or chippedtableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to basket loading leaflet. • Place delicate items in the upper basket. Refer to "Before first use"...