AEG F55030M0P- Manuals

Page 2 - Visit our website for:; Register your product for better service:; CUSTOMER CARE AND SERVICE; General information and tips

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 6 - Washing phase indicator.; PROGRAMMES

1 On/off button 2 Programme guide 3 Programme marker 4 Indicators 5 Display 6 Start button 7 Delay button 8 Multitab button 9 Programme knob Indicators Description Washing phase indicator. Drying phase indicator. Rinse aid indicator. This indicator is off while theprogramme operates. Salt indicator....

Page 7 - Information for test institutes; Write down the product number (PNC) that is on the rating plate.; OPTIONS; Multitab; , the related indicator; BEFORE FIRST USE; Fill the salt container.

2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energyconsumption and the programme duration. 3) With this programme you can wash a load with fresh soil. It gives good washing results in a sh...

Page 8 - Adjusting the water softener; Manual adjustment

6.1 Adjusting the water softener Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 47 - 50 84 - 90 8.4. - 9.0 58 - 63 2 1) 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 2 1) 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 2 1) 8 29 - 36 51 - 64 5...

Page 9 - Press the release button (; DAILY USE; • If the rinse aid indicator is on, fill

6.2 Filling the salt container 1. Turn the cap counterclockwise andopen the salt container. 2. Put 1 litre of water in the salt con-tainer (only for the first time). 3. Fill the salt container with dishwash-er salt. 4. Remove the salt around the openingof the salt container. 5. Turn the cap clockwis...

Page 10 - Using the detergent; Setting and starting a

7.1 Using the detergent 20 30 M A X 1 2 3 4 + - A B C 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart-ment ( A ) . 3. If the programme has a prewashphase, put a small quantity of deter-gent on the inner part of the appli-ance door. 4. If you use detergent...

Page 11 - HINTS AND TIPS

Cancelling the programme Press and hold Multitab and Delay at the same time until:• The programme duration flashes in the display. • The phase indicators come on. Make sure that there is detergentin the detergent dispenser be-fore you start a new programme. At the end of the programme When the progr...

Page 12 - CARE AND CLEANING; Cleaning the filters

• Put hollow items (cups, glasses and pans) with the opening down. • Make sure that cutlery and dishes do not bond together. Mix spoons withother cutlery. • Make sure that glasses do not touch other glasses. • Put the small items in the cutlery bas- ket. • Put the light items in the upper bas- ket. ...

Page 13 - Cleaning the spray arms; TROUBLESHOOTING; - The appliance does not fill with; Problem; The programme does not start.; Start

6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filterscan cause bad washing resultsand damage to the appliance. 9.2 Cleaning the spray a...

Page 14 - Make sure that the water tap is open.; If the washing and drying; Dishes are wet; How to activate the rinse

Problem Possible solution The appliance does not fill withwater. Make sure that the water tap is open. Make sure that the pressure of the watersupply is not too low. For this information,contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the...

Page 15 - Press; Delay; again and again to; TECHNICAL INFORMATION; ENVIRONMENT CONCERNS

Off On 5. Press Delay again and again to change the setting. 6. Deactivate the appliance to confirmthe setting. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth(mm) 596 / 818 - 878 / 580 Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressu...