AEG F50513VI0- Manuals

5.1 Consumption values Programme 1) Water (l) Energy (kWh) Duration (min) P1 11 1.050 195 P2 7 - 12 0.6 - 1.4 40 - 150 P3 13 - 15 1.5 - 1.6 150 - 170 P5 9 0.8 30 P4 13 - 14 0.7 - 0.9 70 - 80 P6 4 0.1 14 1) The pressure and the temperature of the water, the variations of the mains supply, the options...

The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales.The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is im...

you always use rinse aid for best drying performance.If you use standard detergent or multi- tablets without rinse aid, activate the notification to keep the rinse aid refill indicator active. How to deactivate the rinse aid empty notification The appliance must be in programme selection mode. 1. To...

7.1 ExtraHygiene With this option you have better hygiene results. During the last rinsing phase, the temperature stays at 70 °C for at least 10 minutes. How to activate ExtraHygiene Press , the related indicator comes on If the option is not applicable to the programme, the related indicator does n...

5. Turn the cap of the salt container clockwise to close the salt container. CAUTION! Water and salt can come out of the salt container when you fill it. After you fill the salt container, immediately start a programme to prevent corrosion. 8.2 How to fill the rinse aid dispenser A B D C M A X 1 2 3...

Cancelling the delay start while the countdown operates When you cancel the delay start you have to set the programme and options again.Press and hold Reset until the appliance is in programme selection mode. Cancelling the programme Press and hold Reset until the appliance is in programme selection...

6. Activate the rinse aid empty notification. 10.4 Loading the baskets • Only use the appliance to wash items that are dishwasher-safe. • Do not put in the appliance items made of wood, horn, aluminium, pewter and copper. • Do not put in the appliance items that can absorb water (sponges, household ...

• To maintain the performance of your appliance at its best, we recommend to use monthly a specific cleaning product for dishwashers. Follow carefully the instructions on the packaging of the product. 12. TROUBLESHOOTING If the appliance does not start or it stops during operation. Before you contac...

Problem and alarm code Possible cause and solution The appliance stops andstarts more times during op-eration. • It is normal. It provides optimal cleaning results and en- ergy savings. The program lasts too long. • If the delayed start option is set, cancel the delay setting or wait for the end of ...

Problem Possible cause and solution Limescale deposits on the ta-bleware, on the tub and onthe inside of the door. • The level of salt is low, check the refill indicator.• The cap of the salt container is loose.• Your tap water is hard. Refer to "The water softener" . • Even using multi-func...