AEG F45013W0- Manuals

Page 2 - Visit our website for:; Register your product for better service:; CUSTOMER CARE AND SERVICE; General information and tips

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Only for UK and Ireland.

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 4 - PRODUCT DESCRIPTION

– By clients in hotels, motels and oth- er residential type environments – Bed and breakfast type environ- ments. WARNING! Risk of injury, burns, electricalshock or fire. • Do not change the specification of this appliance. • Put knives and cutlery with sharp points in the cutlery basket with thepoi...

Page 5 - Disposal; CONTROL PANEL; Indicators; The indicator comes on when the dry phase operates.

2.1 Disposal WARNING! Risk of injury or suffocation. • Disconnect the appliance from the mains supply. • Cut off the mains cable and discard it.• Remove the door catch to prevent children and pets to get closed in theappliance. 3. CONTROL PANEL 1 2 3 4 7 5 6 8 1 Off position 2 Programme marker 3 Ind...

Page 6 - PROGRAMMES; All; Information for test institutes; Write down the product number (PNC) that is on the rating plate.

4. PROGRAMMES Pro-gramme 1) Degree of soilType of load Programmephases Dura-tion(min) Energy(kWh) Water(l) 2) Heavy soilCrockery, cut-lery, pots andpans PrewashWash 70 °CRinsesDry 140 -150 1.6 - 1.8 14 - 15 3) AllCrockery, cut-lery, pots andpans PrewashWash 45 °C or 70°CRinsesDry 90 - 130 1.1 - 1.7 ...

Page 7 - OPTIONS; Press; Multitab; , the Multitab indicator; BEFORE FIRST USE; Fill the salt container.; Adjusting the water softener

5. OPTIONS 5.1 Multitab Activate this option only when you usethe combi detergent tablets.This option deactivates the flow of rinseaid and salt. The related indicators areoff.The programme duration can increase. Activating the Multitabfunction Activate or deactivate the Multi-tab function before the...

Page 8 - Manual adjustment; Press and hold; Release; when the display; again and again to

Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Manual Elec- tronic 19 - 22 33 - 39 3.3 - 3.9 23 - 27 2 1) 5 1) 15 - 18 26 - 32 2.6 - 3.2 18 - 22 1 4 11 - 14 19 - 25 1.9 - 2.5 13 - 17 1 3 4 - 10 7 - 18 0.7 - 1.8 5 - 12 1 2 < 4 < 7 < 0...

Page 9 - Press the release button (

6.2 Filling the salt container 1. Turn the cap counterclockwise andopen the salt container. 2. Put 1 litre of water in the salt con-tainer (only for the first time). 3. Fill the salt container with dishwash-er salt. 4. Remove the salt around the openingof the salt container. 5. Turn the cap clockwis...

Page 10 - DAILY USE; • If the rinse aid indicator is on, fill; Using the detergent; A B

7. DAILY USE 1. Open the water tap. 2. Turn the programme knob until theprogramme marker is aligned with aprogramme on the control panel.Make sure that the appliance is insetting mode, refer to ’SETTINGAND STARTING A PROGRAMME’.• If the salt indicator is on, fill the salt container. • If the rinse a...

Page 12 - HINTS AND TIPS; The water softener

gramme marker is aligned with theoff position. 2. Close the water tap. • If you do not deactivate the appliance, after three minutesfrom the end of the pro-gramme:– All the indicators go off.– The display shows one hori- zontal status bar. This helps to decrease the ener-gy consumption.Press one of ...

Page 13 - CARE AND CLEANING; Cleaning the filters

• Put the light items in the upper bas- ket. Make sure that they do not move. • Make sure that the spray arms can move freely before you start a pro-gramme. 8.4 Before starting a programme Make sure that: • The filters are clean and correctly in- stalled. • The spray arms are not clogged.• The posit...

Page 14 - Cleaning the spray arms; TROUBLESHOOTING; - The appliance does not fill with; Problem; The programme does not start.; Start; Make sure that the water tap is open.

6. Make sure that the filter ( B ) is cor- rectly positioned under the 2 guides( C ). 7. Assemble the filter ( A ) and put it back in filter ( B ). Turn it clockwise until it locks. An incorrect position of the filterscan cause bad washing resultsand damage to the appliance. 9.2 Cleaning the spray a...

Page 15 - Make sure that the water tap is not clogged.; If the washing and drying; Dishes are wet

Problem Possible solution Make sure that the pressure of the watersupply is not too low. For this information,contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter in the inlet hose isnot clogged. Make sure that the inlet hose has no kinks orbends...

Page 16 - TECHNICAL INFORMATION; ENVIRONMENT CONCERNS

7. To confirm the setting, turn the pro-gramme knob until the programme marker is aligned with the off posi-tion. 11. TECHNICAL INFORMATION Dimensions Width / Height / Depth(mm) 600 / 850 / 610 Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure M...