AEG F34502VI0- Manuals

Page 2 - Visit our website for:; CUSTOMER CARE AND SERVICE

CONTENTS 1. SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. CONTROL PANEL . . . . . ...

Page 3 - SAFETY INSTRUCTIONS; Children and vulnerable; Only for UK and Ireland.; Water connection

1. SAFETY INSTRUCTIONS Before the installation and use of the ap-pliance, carefully read the supplied in-structions. The manufacturer is not re-sponsible if an incorrect installation anduse causes injuries and damages. Alwayskeep the instructions with the appliancefor future reference. 1.1 Children ...

Page 5 - Program; Indicators

2. PRODUCT DESCRIPTION 1 2 3 4 5 6 7 8 9 10 1 Upper spray arm 2 Lower spray arm 3 Filters 4 Rating plate 5 Salt container 6 Rinse aid dispenser 7 Detergent dispenser 8 Cutlery basket 9 Lower basket 10 Upper basket 3. CONTROL PANEL 1 3 4 5 2 1 On/off button 2 Programme indicators 3 Indicators 4 Progr...

Page 6 - PROGRAMMES; All; Information for test institutes

Indicators Description Wash indicator. Rinse aid indicator. This indicator is off while the programmeoperates. Salt indicator. This indicator is off while the programme oper-ates. 4. PROGRAMMES Pro-gramme 1) Degree ofsoilType of load Programmephases Duration(min) Energy(kWh) Water(l) 2) Normal soilC...

Page 7 - OPTIONS; Acoustic signals; BEFORE FIRST USE

5. OPTIONS Activate or deactivate the op-tions before the start of a pro-gramme. You cannot activate ordeactivate the options while aprogramme operates. If one or more options are set,make sure that the related indi-cators are on before the pro-gramme starts. 5.1 Acoustic signals The acoustic signal...

Page 8 - Adjusting the water softener; Electronic adjustment

6.1 Adjusting the water softener Water hardness Water softener adjustment German degrees (°dH) French degrees (°fH) mmol/l Clarke degrees Level 47 - 50 84 - 90 8.4. - 9.0 58 - 63 10 43 - 46 76 - 83 7.6 - 8.3 53 - 57 9 37 - 42 65 - 75 6.5 - 7.5 46 - 52 8 29 - 36 51 - 64 5.1 - 6.4 36 - 45 7 23 - 28 40...

Page 10 - DAILY USE; Using the detergent; A B; Using the combi detergent

7. DAILY USE 1. Open the water tap. 2. Press the on/off button to activatethe appliance.• If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the detergent. 5. Set and start the correct programmefor the t...

Page 11 - Cancelling the programme; Important

4. Start the shortest programme with arinsing phase, without detergent andwithout dishes. 5. Adjust the water softener to the wa-ter hardness in your area. 6. Adjust the released quantity of rinseaid. 7.3 Setting and starting a programme Reset function For some settings it is necessary that theappli...

Page 12 - HINTS AND TIPS

8. HINTS AND TIPS 8.1 The water softener Hard water contains a high quantity ofminerals that can cause damage to theappliance and bad washing results. Thewater softener neutralises these miner-als.The dishwasher salt keeps the watersoftener clean and in good conditions. Itis important to set the rig...

Page 13 - CARE AND CLEANING; Cleaning the filters; Cleaning the spray arms

9. CARE AND CLEANING WARNING! Before maintenance, deactivatethe appliance and disconnect themains plug from the mains sock-et. Dirty filters and clogged sprayarms decrease the washing re-sults.Make a check regularly and, ifnecessary, clean them. 9.1 Cleaning the filters C A B 1. Turn the filter ( A ...

Page 14 - TROUBLESHOOTING; Alarm code

10. TROUBLESHOOTING The appliance does not start or it stopsduring operation.Before you contact the Service, refer tothe information that follows for a solu-tion to the problem. With some problems, the end indica-tor flashes intermittently to show analarm code. Alarm code Problem • The end indicator...

Page 15 - If the washing and drying; Dishes are wet; TECHNICAL INFORMATION

Problem Possible solution The anti-flood device is on. Close the water tap and contact the Service. After the checks are completed, activatethe appliance. The programme contin-ues from the point of interruption.If the problem occurs again, contact theService.If other alarm codes appear, contact theS...

Page 16 - ENVIRONMENT CONCERNS

12. ENVIRONMENT CONCERNS Recycle the materials with thesymbol . Put the packaging inapplicable containers to recycle it.Help protect the environment andhuman health and to recycle wasteof electrical and electronic appliances. Do not disposeappliances marked with the symbol with the household waste. ...