Page 2 - Contents
55 Contents Safety warnings 56 For the user 56 For the installer 56 Description of the Appliance 58 Extractor version 58 Filter Version 59 Control Panel 60 Maintenance and care 61 Grease Filter 61 Opening the grid 61 Removing the filter 61 Charcoal filter 62 Changing the light bulb 63 What to do if ...
Page 3 - Safety warnings; For the user
56 Safety warnings For the user • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal firedcookers it is essential to avoid open fla...
Page 5 - Description of the Appliance; Extractor version
58 A B Description of the Appliance • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter. • You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre). Extractor version • I...
Page 6 - Filter Version
59 E E E Filter Version • The air is filtered through a charcoal filter and returned to the kitchen.• You will need an original AEG charcoal filter for the recirculation function. (Available from your local AEG Service Force Centre). • Opening the grid: Move the two sliders towards the centre (in th...
Page 7 - Control Panel
60 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated.Turn the hood on a few minutes before you start cooking, you willthen get an under pressure in the kitchen. The hood should be left onafter cooking for about 15 ...
Page 8 - Maintenance and care; Grease Filter
61 Fig. 6 O PE N CL OS ED O PE N CL OS ED Guides Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. • Never insert pointed objects in the motor’s protective grid.• Wash the outside surfaces using a delicate detergent solutio...
Page 9 - Charcoal filter
62 Charcoal filter • The charcoal filter should only be used if you want to use the hood in the recirculation function. • To do this you will need an original AEG charcoal filter (available from your local Service Force Centre). • The charcoal filter cannot be washed nor regenerated. The charcoal fi...
Page 11 - What to do if
64 What to do if If your appliance fails to work properly please carry out the followingchecks. Symptom Solution The cooker hood will not start... Check that:The hood is connected tothe electricity supply.Check that a fan speed hasbeen selected The cooker hood is not working Check that: effectively....
Page 12 - Technical assistance service (not for UK); Service and spare parts for UK
65 Special accessories* Charcoal filter KLF60/80 E-Nr. 610 899 421 * Not available in UK, please contact your local Service Force Centre. Technical assistance service (not for UK) You are welcome to telephone our technical assistance service (see listof technical assistance centres) whenever you nee...
Page 13 - Technical Specifications; Mounting accessories included
66 Technical Specifications Model: DE 3160 - CHDE 3160 Dimensions: (in cm):Height 40 Width 59,9 Depht 27 Maximum absorbed power: 200 W Motor absorption: 120 W Lighting: 2 x40 W Length of the cable: 150 cm Mounting accessories included 1 Flange Ø 100 mm1 Flange Ø 120 mm2 Hooks2 rails1 Deflector2 Wash...
Page 14 - Electrical connection; Safety warnings for the electrician
67 Electrical connection Safety warnings for the electrician Before connecting the appliance to the power supply, check that thevoltage indicated on the rating plate corresponds to the mains powersupply available. Appliances fitted with a plug can be connected to anystandard power socket within easy...
Page 16 - Installing the hood to the wall
69 Installing the hood to the wall It is possible to fix the hood in position, if necessary, by only attachingit to the rear wall. Proceed as follows: • Drill four Ø 8mm holes on the wall as indicated. Fig. 10. • I n s e r t t h e f o u r w a l l p l u g s s u p p l i e d i n t o t h e s e h o l e s...
Page 17 - Fixing a furniture door to the visor
70 • Fix the base spacer M to the wall with the two screws R 5x45 provided using either the long or the short arm, depending on thedepht of the side cupboards. Do not tighten the screws fully. Fig. 11. • F i x t h e h o o d t o t h e w a l l b y m e a n s o f t h e t w o h o o k s P p r e v i o u s ...
Page 19 - © Copyright by AEG
AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberg http://www.aeg.hausgeraete.dehttp://www.aeg.co.uk © Copyright by AEG LI1SCC Ed. 12/02