Page 2 - Electrical Connection and Working Test; Guide to use the instruction book
2 For the User Important Safety Information Your Appliance Operating Instructions Cooker Hood Controls To Operate Recirculation Extraction Maintenance and Cleaning External Cleaning Metal Grease Filter To Remove the Grease Filter Cassette Charcoal Filter To Remove/Replace the Charcoal Filter Worktop...
Page 3 - IMPORTANT SAFETY INFORMATION; of these warnings contact the Customer Services Department.; During Use
3 Installation • Any installation work must be undertaken by a quali - fied electrician or competent person. • This hood must be installed in accordance with the installation instructions and all measurements adhered to. • If the cooker hood is installed for use above a gas appliance then the provis...
Page 4 - YOUR APPLIANCE
Page 5 - OPERATING INSTRUCTIONS; it will not extract steam
5 OPERATING INSTRUCTIONS This cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam . Key Function Display A Turns the Lighting System on and off. On or Off B Turns the Motor on and off. On or Off C Activates speed one. On. D Activates speed two. On. E Acti...
Page 6 - Recirculation Mode; Fitting the Ducting
6 This cooker hood can be used to recirculate or extract contaminated air. Recirculation Mode The cooker hood is supplied specified for use in the recir - culation mode with the charcoal filter fitted. The contaminated air is cleaned by passing through the filters and than back into the kitchen.The ...
Page 7 - MAINTENANCE AND CLEANING; External Cleaning; Metal Grease Filters; Alarm reset
7 MAINTENANCE AND CLEANING Before carrying out any maintenance or lean-ing isolate the cooker hood from the mains supply. The cooker hood must be kept clean, as a build up of grease or fat can be a fire hazard. External Cleaning The metal casing, grille and chimney should be cleaned at least once a ...
Page 8 - Alarm signal reset
8 MAINTENANCE AND CLEANING Alarm signal reset • Turn the Lights and the Suction motor off. • Press button H and hold for at least 2 seconds, confirmation is provided by the fact that the Led goes out. Before carrying out any maintenance or cleaning isolate the cooker hood from the mains supply. Char...
Page 9 - Changing the Halogen Spot Lamp
9 Changing the Halogen Spot Lamp • Extract the lamp from the lamp holder by pulling gently. • Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes. Replacement filters and light bulbs can be obtained from your local Service Force ...
Page 10 - Symptom
10 SOMETHING NOT WORKING SERVICE AND SPARE PARTS If, having followed these instructions carefully, your cooker hood fails to work properly please carry out the following checks. Symptom The cooker hood will not start The cooker hood is not working effectively The cooker hood has switched off during ...
Page 11 - GUARANTEE CONDITIONS; Standard Guarantee Conditions; This Guarantee does not cover:; EUROPEAN GUARANTEE; you and your appliance.
11 GUARANTEE CONDITIONS Standard Guarantee Conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG built-in appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, the company will, at our option, repair or replac...
Page 12 - INSTALLATION INSTRUCTIONS; ELECTRICAL CONNECTIONS; Electrical Requirements
12 INSTALLATION INSTRUCTIONS It is dangerous to alter the specifications or attempt to modify this product in any way. Technical Information DIMENSIONS HEIGHT (CANOPY): 270 mm HEIGHT (CHIMNEY): 500-330 mm WIDTH (CANOPY): 698 - 898 mm WIDTH (CHIMNEY): 300 mm GROSS: 26 kg - 28 kg NET: 17 kg - 20 kg EL...
Page 13 - INSTALLING THE COOKER HOOD; Please ensure that when the appliance is installed it; Installation Requirements; Unpacking; The canopy is supplied with the following components
13 INSTALLING THE COOKER HOOD Please ensure that when the appliance is installed it is easily accessible to an engineer in the event of a breakdown. All installations must comply with the local authorities requirements for the discharge of exhaust air. Incorrect installation may affect the safety of...
Page 14 - Wall drilling and bracket fixing
14 INSTALLATION INSTRUCTIONS Wall drilling and bracket fixing Wall marking: • Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. • Draw a horizontal line at 650 mm above the hob. • Place bracket 7.2.1...
Page 15 - Upper exhaust flue; Electrical connection and working
15 Hood body mounting • Before attaching the hood body, tighten the two screws Vr located on the hood body mounting points. • Hook the hood body onto the screws. • Fully tighten support screws. • Adjust screws Vr to level the hood body. Chimney assembly Upper exhaust flue • Slightly widen the two si...
Page 16 - The symbol
436004092_02 - 080826 The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of ...