AEG C9500G-CMOI- Manuals

Page 2 - ENVIRONMENT PROTECTION; RECCOMANDATIONS AND PRECAUTIONS; the current and to close the gas general tap.

2 GENERAL INFORMATION DESTINED TO THE END USER ENVIRONMENT PROTECTION Packing disposal Sort packing into different materials (cardboard, polystyreneetc.) and dispose of them in accordance with local wastedisposal laws. This appliance complies with the following European Directives:- 73/23/EEC regard...

Page 3 - USE OF THE GAS OVEN; gas off

3 3 The first time the oven is used, it may give off acrid smells, causedby the first heating of isolating panels glue surrounding the oven(it is necessar y to heat up the oven at the maximumtemperature for about 30-40 minutes with closed door).It is something normal, and in case it will occur, wait...

Page 4 - USE OF THE ELECTRIC GRILL; Heat the oven 5 minutes before introducing the food.; USE OF THE GAS GRILL; To turn the oven light on, press switch .; Knob position

4 4 Manual ignition of the grillOpen the oven door, then turn the oven knob to the right and placeit on the grill position .Bring a light match near the holes of the burner placed on theoven upper part (fig.4). 1 2 3 4 5 6 7 8 210 170 140 250 Use of the gas grill with the oven door closedSome models...

Page 5 - INSTRUCTIONS FOR USE OF CONTROL DEVICES; USE OF THE TURNSPIT

5 5 PCI "Campanil"TR 259 Analogic INSTRUCTIONS FOR USE OF CONTROL DEVICES (ACCORDING TO THE MODELS) Setting the clockPress the control knob and turn clockwise. Alarm programme adjustementTurn the knob clockwise without pressing it in. At the end of theprogrammed time an alarm will sound. To ...

Page 6 - Functions; ELECTRICAL CONNECTION

6 6 XII XI X IX VIII VII VI V I II III IV ELECTRONIC TIMER FOR COOKER (Fig. 9) Functions OnThe display flashes. Time settingPress the left button.Set the time with buttons “+” and “-”.This function remains activated 7 seconds after the last +/-operation. Timer settingThis function is permanently act...

Page 7 - CARE AND MAINTENANCE; B C; INSTRUCTIONS DESTINED TO THE USER; OVERALL DIMENSIONS

7 7 H05 RR-FH05 RR-F XII XI X IX VIII VII VI V I II III IV L N A CARE AND MAINTENANCE Before cleaning the appliance, disconnect the gas generaltap and unplug the appliance or disconnect power at themain circuit breaker of the electrical system.Do not clean the appliance surfaces when still hot. IMPO...

Page 8 - opening directly to the outside, situated at; INLET

8 8 GAS CONNECTION ROOMS VENTILATION A B C GAS APPLIANCESThis appliance is not connected to a device to vent the combustionproducts. It must therefore be installed and connected in conformitywith the installation standards in force.Particular attention must be paid to the standards on ventilationof ...

Page 9 - GAS ADJUSTMENT; with separated thermostat

9 9 F GAS ADJUSTMENT C GB A B Unscrew the adjusting screw in order to increase the flow or screwit to decrease the flow.The right adjustment is obtained when the flame has a length ofabout 3 or 4 mm.For butane/propane gas, the adjusting screw must be tight screwed.Make sure that the flame does not g...

Page 10 - In this way, entrace of the air increases or descreases, obtaining; REGULATION OF AIR ADJUSTER; Be sure that the flame does not lift or light back or present a; REGULATION AIR ADJUSTER

10 10 A A APPLIANCE MAINTENANCE Fig. L Fig. M C GB After having removed the knob once again, making sure that thethermostat rod has not been moved, screw slightly the abovementioned by-pass screw, to obtain a flame of 3 or 4 mm of length.For butane/propane gas, the adjusting screw must be tight scre...