AEG C6040EWS- Manuals

Page 3 - ENVIRONMENT PROTECTION; RECCOMANDATIONS AND PRECAUTIONS; to disconnect

3 GENERAL INFORMATION DESTINED TO THE END USER ENVIRONMENT PROTECTION Packing disposal Sort packing into different materials (cardboard, polystyreneetc.) and dispose of them in accordance with local wastedisposal laws. This appliance complies with the following European Directives:- 73/23/EEC regard...

Page 4 - FIRST PART; gas off; Heat

4 WORK-TOP USE FIRST PART USING GAS BURNERSThe following symbols are on the control panel next to each knob: - Black circle gas off - Large flame maximum setting - Small flame minimum setting The minimum position is at the end of the anti-clockwise rotationof the knob. All operation positions must b...

Page 5 - USE OF THE GAS OVEN; FOOD; Knob position

Use of the ovenBefore using the oven for the first time, heat it to the maximumtemperature for about 30 minutes to eliminate smokes andunpleasant smells produced by internal components. Manual ignition of the burnerOpen the oven door and bring a light match near the central holeA placed on the oven ...

Page 6 - , in the models fitted with turnspit, corresponds also; USE OF THE ELECTRIC GRILL; To turn the oven light on, press switch .; USE OF THE GAS GRILL; - Put the food in spit L, paying attention to block it within the two; S and a protecting glove in isolating wool.

ELECTRIC GRILLSome appliances with gas oven can be fitted with an electric grill.a – To operate the electric heating element, press button whichlights up to indicate that the grill is working.Symbol , in the models fitted with turnspit, corresponds also to the turnspit operation.b – In some other ap...

Page 7 - USE OF THE ELECTRIC OVEN

7 USE OF THE ELECTRIC OVEN FIRST PART The first time the oven is used, it may give off acrid smells, causedby the first heating of isolating panels glue surrounding the oven(it is necessar y to heat up the oven at the maximumtemperature for about 30-40 minutes with closed door).It is something norma...

Page 9 - INSTRUCTIONS FOR USE OF CONTROL DEVICES; III; XII; saucepan symbol

INSTRUCTIONS FOR USE OF CONTROL DEVICES (ACCORDING TO THE MODELS) Fig. 17 Fig. 18 SettingTo set, press and release the desired function, and within 5seconds set the time with + and - buttons. + and - buttons.The + and - buttons increase or decrease the time at a speeddepending on how long the button...

Page 10 - Functions

10 end time button the next cooking end time appears on the display.Set the cooking end time with + button. The relay and the cookingtime symbol switch off.The symbol lights up again when the time of day corresponds tothe cooking star t time. When the cooking time is up, the AUTOsymbol flashes, the ...

Page 11 - CARE AND MAINTENANCE; Before cleaning the appliance

11 CARE AND MAINTENANCE Before cleaning the appliance , disconnect the gas general tap and unplug the appliance or disconnect power at the maincircuit breaker of the electrical system.Do not clean the appliance surfaces when still hot. ENAMELLED SURFACESClean with a damp sponge using soap and water....

Page 12 - SECOND PART; opening directly to the outside, situated at

12 230 V ~ 400 V 2N~ 400 V 3N~ 5 4 3 2 1 L1 N E 5 4 3 2 1 L1 L2 N E 5 4 3 2 1 L1 L2 L3 N E ROOMS VENTILATION GAS CONNECTION INSTRUCTIONS DESTINED TO THE USER SECOND PART Fig. 29 OVERALL DIMENSIONS The cooker is fitted with 4 legs for an eventual alignment in heightwith the furniture. WARNINGSBefore ...

Page 13 - ELECTRICAL CONNECTION; BACK SIDE; Appliance type

13 ELECTRICAL CONNECTION Connection of the appliance to the power mains should be doneby a licensed electrician familiar with local safety regulations.This appliance must be earthed by law. Before connectingthe appliance to the electrical supply, check that the earthsystem in your house is working c...

Page 14 - GAS ADJUSTMENT; to the minimum flow and viceversa .

14 Z T If the appliance is foreseen to operate with a type of gas differentfrom the suitable supply gas, proceed as follows: change theinjectors, adjust the minimum flow of the burners, change thepush-on connector.In order to change the work-top injectors, it is necessary to act asfollows: remove th...

Page 15 - APPLIANCE MAINTENANCE; switch the appliance

15 Clean the cone and its slot by means of a cloth soaked with diluent.Slightly grease the cone with the relevant grease, put it in its slot,and turn it some times. Remove the cone again, remove theexceeding grease making sure the gas entries are not obstructedby grease residuals. Assemble everythin...