AEG BS7304001- Manuals

– Disconnect the appliance from the power supply.– Cut off the mains cable and discard it.– Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation. PRODUCT DESCRIPTION General overview 2 1 11 5 4 6 7 9 10 5 4 3 2 1 ...

Oven accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Grill / roasting pan To bake and roast or as pan to collect fat. • Steam set Unperforated and perforated food contain - er. 8 Product description

• Sponge 150 For absorbing residual water from the steam generator. • Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance.• Clean the appliance before first use....

If you do not touch at the end, the settings save automatically after five seconds. CONTROL PANEL Electronic programmer Use the sensor fields to operate the appliance. Sensor Field Function Description 1 - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the a...

When the appliance is at the set temperature Heat up indicator goes off the display. DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use:• manual mode -to set an oven function, the temperature and the cooking time manually. • automatic programmes -t...

Oven function Application 8 Slow Cook To prepare very lean, tender roasted food. 9 Conventional Cooking To bake and roast food on one shelf position. 10 Frozen Foods To make your convenience food like e.g. French Fries, Wedg - es, spring rolls crispy. 11 Turbo Grilling To roast larger meat joints or...

Fast heat up function The fast heat up function decreases the heat up time.Do not put food in the oven when the fast heat up function operates. Activating the fast heat up function : Touch and hold for more then three seconds. If you activate the fast heat up function, the bars on the display flash ...

Energy saving The appliance has same features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cook - ing time is longer then...

2. Touch again and again until the dis - play shows . flashes in the display. 3. Use or to set minutes for DURA - TION. 4. Touch to confirm 5. Use or to set hours for DURATION. If you touch or during setting hours for DURATION, the appliance goes to setting of the END function.6. When the set time e...

TION function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and th...

2. Touch or to choose the automatic recipes. 3. Touch or the automatic recipe activates automatically after five seconds. 4. When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. 5. Touch any sensor field or open the oven door to stop an acoustic...

• Deactivating the my favourite programme function: Touch . When the my favourite programme function operates, you can change the time and tem - perature. USING THE ACCESSORIES WARNING! Refer to "Safety information" chapter. Core Temperature Sensor The core temperature sensor measures the co...

While the appliance calculates the approximate duration time, the value of the Count Up Timer function shows in the Timer/Residual heat display. When the first calculation ends, the Timer/Residual heat display shows - , and then the approximate duration of the cooking. The appliance continues to cal...

Inserting the wire shelf and pan together Put the wire shelf on the pan. Push the pan be - tween the guide-bars of one of the shelf positions. ADDITIONAL FUNCTIONS Child safety You cannot activate the appliance on if the child safety device operates.Activating/Deactivating the child safety device:1....

eight settings (from SET1 to SET7). The number of the settings is different for different models. Look into the table below to see the possible value of each setting. Settings menu Indicator of the setting menu Description Value to set SET1 SET+GO ON/OFF SET2 RESIDUAL HEAT INDICATOR ON/OFF SET3 KEY ...

Brightness of the display There are two modes of display's brightness: • Night brightness - when the appliance is off, the brightness of the display is lower between 22:00 and 06:00; • Day brightness: – when the appliance is on;– if you touch any of the sensor fields during night brightness (apart f...

Remove water from the steam generator with the Sponge 150 and rub dry. Keep the door open for approximately 1 hour to let the appliance dry fully. You can use the End function to delay start of cleaning process (refer to "Setting the END"). Shelf support You can remove the shelf support to c...

Remove a lime residue with water and vinegar. CAUTION! Chemical de-scaling agents can damage oven enamel. Obey instructions of the manufac - turer! Cleaning the Water Tank and the Steam Generator:1. Fill the water and vinegar mixture (approximately 250 ml) through the water tank in the steam generat...

Use the same oven lamp type. 5. Install metal frame and seal and tighten screws.6. Install the left shelf rail. Oven door and glass panels To clean the oven door, remove it. CAUTION! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door1. Open the oven doo...

4. Hold the door glass panels on their top edge one by one and pull them up out of the guide 5. Clean the door glass panels.To install panels follow the procedure in re - verse. Install the smaller panel first, then the larger. WHAT TO DO IF… WARNING! Refer to "Safety information" chapter. P...

The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. We recommend that you write the data here:Model (MOD.) ......................................... Product number (PNC) ......................................... Serial number (...