Page 2 - reading to get the very best from it.; CUSTOMER CARE AND SERVICE; Always use original spare parts.
CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 4 3. PRODUCT DESCRIPTION...............................
Page 4 - SAFETY INSTRUCTIONS; Installation
• If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. • Before maintenance, deactivate the appliance and disconnect the mains plug from the mains socket. • Do not use water spray and steam to...
Page 5 - PRODUCT DESCRIPTION; Appliance overview
2.4 Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. ...
Page 6 - CONTROL PANEL; Control panel description
3.3 Multilingual badges and knob To install the multilingual badge and the knob, follow the instructions given in the installation leaflet, supplied with the relevant kit. 3.4 Fixing plate kit (4055171146) Available from your authorized dealer.If you install the appliance on a plinth, secure the app...
Page 7 - Display
4.2 Display A H J K L C D E F G B I The display shows: A Temperature of the set programme Cold water B Spin speed of the set programme No Spin symbol 1) Rinse hold symbol 1) Only available for SPIN/DRAIN programme. C The phase symbols When a programme is set, all the symbols of the phases related to...
Page 9 - PROGRAMME CHART
K The extra rinse symbol comes on when this function is activated. The value shows the total number of the rinses. The indicator bar is fully filled when you set the maximum number ofrinses. L the Stain symbol comes on when you activate the function. The Prewash symbol comes on when this function is...
Page 14 - OPTIONS; Delay Start
Programmes Load (kg) Energy con- sumption(kWh) Water con-sumption(litre) Approxi-mate pro-gramme du-ration (mi-nutes) Remainingmoisture(%) 1) Standard 40 °C cot-ton 4 0.49 40 179 44 1) At the end of spin phase. Off Mode (W) Left On Mode (W) 0,05 0,05 The information given in the chart above are in c...
Page 15 - SETTINGS; BEFORE FIRST USE
8.6 Spin Press this button to: • Decrease the maximum speed of the spin phase of the programme. The display shows only the spin speeds available with the set programme. • Deactivate the spin phase. • Activate the Rinse Hold function. Set this function to prevent fabric creases. The appliance does no...
Page 19 - AUTO OFF option; HINTS AND TIPS; The laundry load
11.15 AUTO OFF option The AUTO OFF option automatically deactivates the appliance to decrease the energy consumption when:• You do not use the appliance for 5 minutes before you press Start/Pause button. Press the button Auto Off to activate the appliance again. • After 5 minutes from the end of the...
Page 20 - CARE AND CLEANING
12.4 Ecological hints • Set a programme without the prewash phase to wash laundry with normal soil. • Always start a washing programme with the maximum load of laundry. • If necessary, use a stain remover when you set a programme with a low temperature. • To use the correct quantity of the detergent...
Page 24 - TROUBLESHOOTING; Introduction; Possible failures
14. TROUBLESHOOTING WARNING! Refer to Safety chapters. 14.1 Introduction The start of the appliance does not occur or it stops during operation.First try to find a solution to the problem (refer to the table). If not, contact the Authorised Service Centre. With some problems, the acoustic signals op...
Page 26 - EMERGENCY DOOR OPENING
Problem Possible solution The cycle is shorter thanthe time displayed. The appliance calculates a new time according to the laundryload. See the ‘Consumption Values’ chapter. The cycle is longer thanthe time displayed. An unbalanced laundry load increases the duration time. Thisis a normal behaviour...