AEG AC756S - Manuals - manualsarea.com

Page 5 - REPLACEMENT PARTS; Read all safety warnings and all instructions; WORK AREA SAFETY

5 5 TECHNICAL DATA AIR COMPRESSOR AC756S Rated motor power 600 W Rated current 2.5 A Air outlet 6.35mm (1/4”) NITTO style connector/ coupler (suitable for NITTO fitments) Quick connector fitting size 6.35 mm (1/4”) BSP thread Weight 16.4 kg Product dimensions (L x W x H): 430 mm x 380 mm x 365 mm In...

Page 6 - AIR COMPRESSOR SAFETY WARNINGS

6 6 ■ Remove adjusting keys and wrenches. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. AIR COMPRESSOR USE AND CARE ■ Do not exceed the pressure rating of any component in the system. ■ Protect material lines and air lines from damage or p...

Page 7 - Packing list; OPERATION; ATTACHING/DISCONNECTING AIR HOSE

7 7 to instruct others who may use this product. If you loan someone this product, loan them these instructions also. ■ The machine shall be connected to a circuit protection device (fuse or circuit breaker). ■ Operate the machine from the front of the control panel. ■ When the machine is in operati...

Page 8 - TURNING THE AIR COMPRESSOR ON/OFF; USING THE AIR COMPRESSOR; CHECKING THE PRESSURE RELIEF VALVE; TRANSPORTING THE AIR COMPRESSOR; To move the air compressor:; STORAGE

8 8 TURNING THE AIR COMPRESSOR ON/OFF See figure 2. 1. With the air compressor plugged in, press the on/off switch to the ON (I) position to power the compressor on. 2. To turn the air compressor off, press the power switch to the OFF (O) position. NOTE: When the compressor is in the ON (I) position...

Page 9 - MAINTENANCE; GENERAL MAINTENANCE; Normal environment

9 9 tank by the drain valve. 4. Drain water from the tank as instructed in Draining the Tank section. Leave the valve open until the next usage. 5. Wrap the power cord around the cord wrap hooks.6. Store the air compressor in its normal operating position in a dry and protected area. WARNING! Water ...

Page 10 - Risk of fire or explosion.

10 10 Risk of fire or explosion. Spray area must be well ventilated. Do not smoke while spraying or spray where spark or flame is present. Keep compressors as far from the spraying area as possible. Keep compressor, at least 10 m from the spraying area and all explosive vapours. Caution, risk of ele...

Page 11 - TROUBLESHOOTING; PROBLEM

11 11 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Compressor will not run Loss of power or overheating Check for proper use of extension cord No electrical power Check to be sure unit is plugged in Check fuse/breaker Blown shop/house fuse Replace shop/house blown fuse Shop/house breaker open Res...

Page 12 - PARTS LIST

12 12 75 76 77 74 64 55 73 62 1 2 3 4 5 6 7 8 9 11 12 15 16 17 19202122 23 24 26 2728 29 30 31 32 34 35 36 37 38 39 40 10 18 41 44 25 66 67 68 69 70 65 63 61 60 71 45 46 47 50 51 48 49 52 53 54 72 78 33 13 14 42 43 58 59 57 56 79 83 82 81 80 84 85 86 87 PARTS LIST

Page 16 - Techtronic Industries Australia Pty Ltd; NITTO is a registered trade mark owned by Nitto Kohki Co., Ltd.

Techtronic Industries Australia Pty Ltd 31 Gilby Road, Mount WaverleyVIC, 3149, Australia Techtronic Industries N.Z. Limited Unit C, 70 Business Parade SouthHighbrook, Auckland 2013, New Zealand www.aegpowertools.com.au www.aegpowertools.co.nz AEG is a registered trade mark used under license from A...