AEG ABE6821VNF- Manuals

Page 2 - CUSTOMER CARE AND SERVICE; SAFETY INFORMATION

CONTENTS 1. SAFETY INFORMATION............................................................................................. 2 2. SAFETY INSTRUCTIONS.............................................................................................4 3. OPERATION................................................

Page 4 - SAFETY INSTRUCTIONS; Installation

• Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects. • Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. • If the supply cord is damaged, it mus...

Page 6 - OPERATION; Control panel

3. OPERATION 3.1 Control panel 1 2 3 4 5 1 Power indicator light 2 Temperature regulator 3 FROSTMATIC light 4 FROSTMATIC switch and alarm reset switch 5 Alarm light 3.2 Switching on Connect the appliance to the main power supply. 1. Turn the Temperature regulator clockwise to a medium setting. The p...

Page 7 - DAILY USE; Freezing fresh food; Storage of frozen food; HINTS AND TIPS; Normal operating sounds

This function stops automatically after 52 hours.You can deactivate the FROSTMATIC function before its automatic end by pressing the FROSTMATIC button again. The FROSTMATIC indicator will turn off. The function switches off by selecting a different set temperature. 4. DAILY USE WARNING! Refer to Saf...

Page 8 - CARE AND CLEANING

• A faint click noise from the temperature regulator when the compressor switches on or off. 5.2 Hints for energy saving • Do not open the door frequently or leave it open longer than absolutely necessary. • Do not remove the cold accumulators from the freezer basket. 5.3 Hints for freezing To help ...

Page 9 - TROUBLESHOOTING

CAUTION! Do not use detergents, abrasive powders, chlorine or oil-based cleaners as they will damage the finish. 6.3 Periodic cleaning CAUTION! Do not pull, move or damage any pipes and/or cables inside the cabinet. CAUTION! Take care of not to damage the cooling system. CAUTION! When moving the cab...

Page 11 - Closing the door; INSTALLATION

Problem Possible cause Solution Water flows on the floor. The melting water outlet isnot connected to the evapo-rative tray above the com-pressor. Attach the melting wateroutlet to the evaporativetray. Temperature cannot be set. The FROSTMATIC functionis switched on. Switch off FROSTMATICmanually, o...

Page 12 - Electrical Connection

8.1 Location Refer to the assembly instructions for the installation. To ensure best performance, install the appliance well away from sources of heat such as radiators, boilers, direct sunlight etc. Make sure that air can circulate freely around the back of the cabinet. 8.2 Positioning Install the ...

Page 13 - TECHNICAL DATA; Technical data; ENVIRONMENTAL CONCERNS

The appliance is supplied with a 13 amp fuse ( B ). In the event of having to change the fuse in the plug supplied, a 13 amp ASTA approved (BS 1362) fuse must be used. WARNING! A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that it is disposed of safely. 9. T...