Page 2 - Contents
2 Contents Safety warnings 4 for the user 4 for the installer 4 Description of the Appliance 6 Extractor version 6 Filter Version 6 Control Panel 7 LED Indicator lights for verifying the saturation of filters 8 Led – Indicator for grease filter C 8 Led - indicator for charcoal filter D 8 Resetting t...
Page 3 - Safety warnings; for the user
3 Safety warnings for the user • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal firedcookers it is essential to avoid open flames. • Also, when frying, keep the deep frying pan on the cooker top/cooker under careful control. • The ...
Page 5 - Description of the Appliance; Extractor version
5 Description of the Appliance Extractor version • The hood is supplied as an extractor unit and can also beused with a filtering function byfitting one charcoal filter(special accessory). • You will need original AEG charcoal filter for this function(see Special Accessories). • The air is discharge...
Page 6 - Control Panel
6 Control Panel • Best result are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated.Turn the hood on a few minutes before you start cooking, you willthen get an under pressure in the kitchen. The hood should be left onafter cooking for about 15 mi...
Page 8 - Maintenance and care; Metal grease filter
8 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Metal grease filter • The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in theexternal evacuat...
Page 9 - Charcoal filter
9 Charcoal filter • The charcoal filter should only be used if you want to use the hood in its filtering function. • To do this you will need an original AEG charcoal filter (see special accessories). • Cleaning/replacing the charcoal filter Unlike other charcoal filters, the LONGLIFE charcoal filte...
Page 11 - Cleaning; Special accessories; Technical assistance service
11 Cleaning • Warning: always disconnect the hood from the mains power supply before cleaning it.Never insert pointed objects in the motor’s protective grid. • Wash the outside surfaces using a delicate detergent solution. Never use caustic detergents or abrasive brushes or powders. • Only ever clea...
Page 12 - Technical Specifications; Mounting accessories included
12 Technical Specifications Models 9600 D Dimensions - extractor ver (in cm): Height 80-122,5 Width 89,8 Depth 52 Dimensions - filter version (in cm):Height 82-122,5 Width 89,8 Depth 52 Maximum absorbed power: 215 W Motor absorption: 1 x 130 W Lighting: 4 x 20W Length of the cable: 150 cm Mounting a...
Page 13 - Electrical connection; Safety warnings for the electrician
13 Electrical connection Safety warnings for the electrician Before connecting the appliance to the power supply, check that thevoltage indicated on the rating plate corresponds to the mains powersupply available. Appliances fitted with a plug can be connected to anystandard power socket within easy...
Page 14 - Mounting – Figure 7
14 Mounting – Figure 7 • Place the outline (1) on the angle above the cooker hood.• As demonstrated, drill the hole and insert four screw anchors and four screws (2). Do not screw in the screws completely, becausethey act as a hook for the cooker hood. • Prepare the electrical connections and realiz...