AEG 95300KA-MN- Manuals

7 Disposal Disposing of the packaging material • All packaging can be recycled, sheet and hard foam parts are appropriately marked. Please dispose of packaging material and any old appliance with due regard to safety and the environment. Information on disposal • The appliance must not be disposed o...

8 Appliance Description Features of the hob Cooking zone dimensions: rear left: 145 mm rear right: 170/265 mm front left: 210/175/120 mm front right: 145 mm Operating Instructions

9 Control Panel Main "On/Off" button For switching on the entire appliance. The appliance is- switched on when the button is touched for approx. one second, - switched off when the button is touched again for one second.When the appliance is switched on the "Heat Setting/Residual Heat...

10 Heat setting selection and For setting or changing the heat setting ( to ) for the selected coo king zone, or when in timer mode, for setting or changing the required cooking time.- The heat setting or the cooking time is increased using the button and the automatic warm up function activated. - ...

11 Cooking zone safety switch If, after a certain period of time, one of the zones is not switched off or the heat setting not changed, then the cooking zone switches off automati cally. , or is appears in the displays of all the zones that were switched on. The zones are switched off at: • heat set...

12 Operation of the cooking surface TOUCH CONTROL sensor buttons To operate the TOUCH CONTROL sensor buttons, place your finger flat, from above, on the desired button until the corresponding indicator illuminates, or extinguishes, or the desired function is performed.For quicker adjustment leave yo...

13 Cooking with the automatic warm up function All four zones have nine heat settings and are equipped with an automatic warm up function.- , lowest heat setting - , highest heat setting - , automatic warm up function. When you select using the -button the cooking setting that you require for cookin...

14 warm, the automatic warm up function uses the residual heat. This saves time and energy. Switching off a cooking zone 1. Select the desired cooking zone using the cooking zone buttons. 2. Press the and buttons simultaneously to switch off. Cooking without the automatic warm up function If you wan...

16 Setting/changing the cooking time 1. Select the desired cooking zone using the cooking zone selection buttons and set the desired heat setting. 2. Press the "Timer" button to activate the timer function for this cooking zone. 3. Using the or buttons, set or change the amount of time requi...

17 Ending the timer function early There are two ways of switching off the timer early: Switching off the cooking zone and timer simultaneously 1. Select the desired cooking zone using the cooking zone buttons.If the selected cooking zone is in timer mode (TIMER indicator illumina ted), the remainin...

18 Tables and Tips Pans The better the pan, the better the results. • You can recognise good pans by their bases. The base should be thick and as flat as possible. • Pans with aluminium or copper bases can leave metal discoloration on the glass ceramic surface that is very difficult or impossible to...

21 Cleaning and care Ceramic Glass Important: Cleaners must not come into contact with the ceramic glass when hot! All cleaners must be removed with plenty of clean water after cleaning as they may have a caustic effect when the rings are next heated! Do not use any aggressive cleaners, such as e.g....

23 What to do if ... Remedial action in the case of malfunctions A malfunction may only be caused by a minor fault that you can rectify yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific ...

25 INSTALLATION INSTRUCTIONS Important! This appliance must be installed by qualified personnel, accor ding to the manufacturer's instructions and to the relevant country stan dards. Technical Data Appliance Dimensions Width 840 mm Depth 530 mm Height 55 mm Cut-Out Dimensions Width 750 mm Depth 490 ...

26 Legal stipulations, standards, directives This appliance meets the following standards: • EN 60 335-1 and EN 60 335-2-6 in respect of the safety of electrical appliances for household use and similar purposes and • DIN 44546 / 44547 / 44548 in respect of properties of electrical cookers for the h...

27 Safety Instructions for the Installer • A device must be included in the electrical installation that makes it possi ble to isolate the appliance from the mains supply with a minimum contact separation of 3 mm. Suitable isolation devices are e.g. cut-outs, fuses (remove screw type fuses from the ...

28 Installing into a kitchen worksurface Make a note of the serial number on the appliance rating plate prior to installation. This number will be required in the case of requests for service and is no longer accessible after installation, as it is on the original rating plate on the underside of th...

30 Electrical connection Important! Make the electrical connection in accordance with the wiring diagram. • If the mains connection cable has to be replaced, a cable with Spare Parts No. 374 2929 00/7 must be used. After connecting the electrical supply, all cooking zones should be briefly switched ...

Service 31 SERVICE In the «What to do, if ...» section a number of malfunctions are listed that you can rectify yourself. In the event of a malfunction, look there first. Is it a technical malfunction? Then please contact your customer service centre. (You will find addresses and telephone numbers i...