AEG 88070 - Manuals

Disposal Dispose of the dishwasher packaging material correctly.All packaging materials can be recycled.Plastic parts are marked with standard international abbreviations:>PE< for polyethylene, e.g. sheet wrapping material. >PS< for polystyrene, e.g. padding material (always CFC-free). &...

Operating instructions 7 Description of the appliance 1. Upper basket stop 2. Water hardness switch 3. Salt container 4. Detergent dispenser 5. Control panel 6. Rating plate 7. Rinse aid dispenser 8. Filters 9. Lower spray arm 10. Upper spray arm 11. Upper basket IN153 152963991en per CH.qxp 03/08/2...

Operating instructions 8 DIRECTION buttons: these 2 buttons have a double function: a) selecting within the Programmes menub) selecting within the Options menu and the submenu. “OK START” button: is necessary for: - confirm / memorize any option,- start a washing programme.NOTE: the OK START and OPT...

Operating instructions 9 DISPLAY Symbols: indicate the various options In this row several details are displayed:- setting mode, guide to the selection of the washing programmes, duration time of the programme, options (when together with the washing proramme one or more options are set, the update ...

Operating instructions 10 OPTION button: press the button to enter a menu of options, press again to exit from menu. How to set the options 1. Press OPTION button 2. Press DIRECTION buttons until the desired option is displayed: - DELAY START- 3 IN 1- SETTINGS . . .3. Press OK START to select the op...

The options can be set only before the start of a washing programme.Once set, these options will remain activated also for the following cycles, until they will be deactivated, except for DELAY START . First use The first time the dishwasher is switched on, it is possible to select adifferent langua...

Operating instructions 13 Prior to using for the first time Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of wa...

Operating instructions 14 a) Setting manually 1. Open the dishwasher door. 2. Remove the lower basket from the dishwasher. 3. Turn the water hardness switch to position 1 or 2 (see table). 4. Replace the lower basket. The dishwasher is factory set atposition 2. b) Setting electronically The dishwash...

Operating instructions 15 Filling the with salt Only use salt specifically designed for use in dishwashers.All other types of salt not specifically designed for use in adishwasher, especially table salt, will damage the water softener.Only fill with salt just before starting one of the complete wash...

Operating instructions 16 Rinse aid Rinse aid is automatically added during the last rinse, ensuringthorough rinsing, and spot and streak free drying. The dispenser, whichis positioned inside the door, holds about 110 ml of rinse aid, which issufficient for 16 - 40 dishwashing programmes, depending ...

Operating instructions 17 Adjusting the dose According to the finish and drying results obtained, adjust the dose ofrinse aid by means of the 6 position selector (position 1 minimumdosage, position 6 maximum dosage). The dose is factory set in position 4.Increase the dose if there are drops ofwater ...

Operating instructions 18 In daily use • Check if it’s necessary to refill with special salt or rinse aid.• Load cutlery and dishes into the dishwasher.• Fill with dishwasher detergent.• Select a wash programme suitable for the cutlery and dishes.• Start the wash programme. Loading cutlery and dishe...

Operating instructions 19 For washing in the dishwasher the following cutlery/dishes are not suitable: • Cutlery with wooden, horn, china or mother-of-pearl handles • Plastic items that are not heat resistant • Older cutlery with glued parts that is not temperature resistant • Bonded cutlery items o...

Operating instructions 20 The cutlery basket Long bladed knives stored in an upright position are a potentialhazard.Long and/or sharp items of cutlery such as carving knives must bepositioned horizontally in the upper basket.Take care when loading or unloading sharp items such as knives. Removable k...

The upper basket The upper basket is designed for plates (dessert plates, saucers, dinnerplates up to 26 cm in diameter), salad bowls, cups and glasses; theseshould be arranged as shown in the pictures. Glasses with long stems can be placed upside-down in the raised cup-racks.The cup-rack on the lef...

Operating instructions 22 Adjusting the height of the upper basket If washing very large plates you can load them in the lower basketafter moving the upper basket to the higher position. To move to the higher position proceed as follows: 1. Pull out the basket until it stops. 2. Carefully lift both ...

Operating instructions 23 Use of detergent Only use detergents specifically designed for use in dishwashers.Using no more then the correct amount of detergent contributesto reducing pollution.Prior to the start of a wash programme (not for the “Rinse andHold” programme). The detergent is released du...

Operating instructions 24 Different kinds of detergent Detergent tablets Detergent tablets of different brands dissolve at different speeds. Forthis reason some detergent tablets cannot dissolve and develop theirfull cleaning power during short programmes. Therefore please uselong programmes when us...

Operating instructions 25 Use of "3 in 1" combi detergents General advice These products are detergents with integrated and combineddetergent/rinse-aid and salt functions. 1. Before using these products you should first check that the water hardness in your supply is compatible with the use ...

Operating instructions 26 Washing programmes (1) The consumption values were obtained under standardised conditions. They depend on how full the baskets for the dishes are. Variations are therefore possible in practice. (2) Testing programme for EN 50242 (see "Hints for Test Centres). This progr...

Operating instructions 27 Starting a washing programme In this fully integrated appliance the controls are located on the top ofthe door. When selecting a programme, the door needs to be open. 1. Check that the baskets have been loaded correctly and that the spray arms can rotate freely 2. Turn on t...

Operating instructions 28 b) if the delay start has been set , the countdown will start automatically and will decrease with step of 1 hour. Only in the lasthour the decrease will occur from minute to minute.Opening the door will not modify or interrupt the countdown. Once the delay start has elapse...

Operating instructions 29 6. End of the washing programme The dishwasher will automatically stop: an audible signal informs you of the end of the washing programme. When the washing programme has ended, the optical signal on the floor beneath the dishwasher’s door will turn off. Open the dishwasher’...

Operating instructions 30 Maintenance and cleaning Clean the external surfaces of the machine and control panel with adamp soft cloth. If necessary use only neutral detergents. Never useabrasive products, scouring pads or solvent (acetone, trichloroethyleneetc....). Ensure that the seals around the ...

Operating instructions 32 Prolonged periods of non-operation If you are not using the machine for any period of time you areadvised to: 1. Unplug the appliance and then turn off the water. 2. Leave the door ajar to prevent the formation of any unpleasant smells. 3. Leave the inside of the machine cl...

Operating instructions 35 ...the wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arms do not rotate...

Service 36 Service If after all these checks, the problem persists, contact your localService Force Centre, quoting the model (Mod.), product number (PNC)and serial number (S.N.). This information can be found on the rating plate located on the sideof the dishwasher door (see picture). So that you a...

Operating instructions 37 Dimensions: Electrical connection: VoltageOverall powerFuse Water supply pressure: Capacity: Width 59.6 cm Height 86.8 - 94.8 cm Max depth 55.5 cm Max depth with open door 119 cm Information on the electrical connection is given on therating plate on the inner edge of the d...

Installation instructions 38 Installation instructions Any electrical and/or plumbing work required to install thisappliance should be carried out by a qualified electrician and/orplumber or competent person. Remove all packaging before positioning the machine.If possible, position the machine next ...

Installation instructions 39 Water supply connections This dishwasher may be fed with either hot (max. 60°) or cold water.Nevertheless we advise you a cold water supply.A hot water supply is not always efficient with very soiled crockery asit shortens the washing programmes a lot.For making the conn...

Installation instructions 40 Water inlet hose with safety valve After connecting the double-walled water inlet hose, the safety valveis next to the tap. Therefore the water inlet hose is only under pressurewhile the water is running. If the water inlet hose starts to leak duringthis operation, the s...

Installation instructions 41 Water outlet hose connection The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into themachine. 2. Hooked over the edge of ...

Installation instructions 42 Electrical connection Information concerning the electrical connection is given on therating plate on the edge of the dishwasher’s door. Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage and current rating at the site of installatio...

Hints for test centres 43 Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see " Washing programmes " chart). Testing in accordance with EN 60242 must be carried out when the salt dispenser and rinse aid ...