AEG 8490D-M- Manuals

Page 2 - Installation and service

2 Contents Safety instructions ..................................................... 2Description of the cooker hood ................................... 3Using the cooker hood ............................................... 4Maintenance and cleaning .......................................... 6What t...

Page 3 - Description of the cooker hood; Accessories

3 Description of the cooker hood Accessories The following are included with the cooker hood. ● 1 Adaptor 150-125 mm ● 2 Tube clamps ● 1 hood canopy complete with controls, lighting and fan motor. ● 1 telescopic chimney stack formed by: U-shaped upper section and U- shaped lower section. ● 1 reducti...

Page 4 - The control panel; Using the cooker hood; Function at displayed ”SENSOR”

4 The control panel Using the cooker hood T1: Main switch on/off (Activating and deactivating the stand-by mode) T2: Sensor switch enable/disable T3: Lamps on/off D1: Filter saturation indicator D2: Motor speed display 1-2-3-P (intensive) D1-D2: Minute count down display (delayed switch off)T4: Moto...

Page 6 - Maintenance and cleaning; Cleaning the hood

6 Maintenance and cleaning Before doing any maintenance work on the hood, disconnect itfrom the main supply by disconnecting the plug from the wallsocket or unscrewing the fuse. Cleaning the hood Clean the outside of the hood using a damp cloth and a mild detergent.Never use corrosive, abrasive or f...

Page 7 - Changing the light

7 Changing the light Disconnect the cooker hood from the main supply before changing the light.To change the light (Fig. 5): ● Press (1) the lamp cover (2) and open it. ● Replace the old bulb with a new one of the same type (3). ● Close the lamp cover (4). After approximately three years of use, the...

Page 8 - What to do if

8 What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... The hood is connected to theelectricity supply.Check that the fan speed control isset to 1, 2 or 3. The cooker hood is not working The fan speed is set h...

Page 9 - Service and spare parts; Customer Care

9 Service and spare parts In the event of your apppliance requiring service, or if you wish to purchasespare parts, contact your local AEG Service Force Centre by telephoning 08705 929 929 Your call will be automatically routed to the Service Centre covering yourpost code area.Please ensure that you...

Page 10 - Guarantee conditions

10 Guarantee conditions Guarantee ConditionsAEG offer the following guarantee to the first purchaser of this appliance.1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified bypurchase invoice or similar documentatio...

Page 11 - Technical data; Model

11 Technical data Model 8490 D Size Height 820-1370 mm Width 898 mm Depth 480 mm Light Max 2X20 W Grease filter 3 pcs. Voltage 220-240 V Total power 175 W Fuse Rating 13 Amp Extra accessories: Carbon filter KF 8 P-nr. 942 118 609 Carbon filter KFL 60/80 610 899 421 Before you move please contact you...

Page 12 - Installation; Unpacking

12 Installation Unpacking Check that the cooker hood is not damaged. Transportation damagesshould immediately be reported to the transport company. Damages, faultsand missing parts should immediately be repor ted to the retailer.Dispose carefully of the packaging material so that it is out of the wa...

Page 13 - Mounting the chimney

13 Mounting the cooker hood - Fig. 7 Position the template on the wall and mark the position, and drill the holes (2x Ø 8 mm).Mount the two rawl plugs with the hooks (3)Hang the hood on the hooks and level it with the adjustment screws (4)Remove the grease filters (5) and mark for the two screws (6)...