Page 2 - DESCRIPTION OF THE HOT PLATES
2 DESCRIPTION OF THE HOT PLATES 1) Large burner (Left front) of 11.2 MJ (3100 W) 2) Medium burner (Right rear) of 10.2 MJ (2950 W) 3) Small burner (Left rear) of 4.9 MJ (1450 W) 4) Auxiliar burner (Right front) of 4.0 MJ (1050 W) 5) Fish burner (Center) of 9.2 MJ (2600 W) 6) Ultra rapid burner (Left...
Page 3 - USE
3 1) BURNERS Ensure that all gas supply connections are correctand that supply valves are open.The burner controls are engraved graphically toindicate their associated burner and setting. - MANUAL IGNITION (FIG. 1) Select desired hotplate burner, depress controlknob and gently turn anti-clockwise to...
Page 5 - ) PARTS IN STAINLESS STEEL; CLEANING
5 WARNING:Do not wash any part while it is still hot. 2) HOTPLATE Periodically, the enamelled trivets, burners andburner caps should be washed with warm soapywater (fig. 5). Ensure they are completely dry and that all holes inthe burners are clear of obstructions prior to re-assembly. S H O U L D T ...
Page 6 - ) FIXING OF THE HOTPLATE; INSTALLATION
TECHNICAL INFORMATION FOR INSTALLATION PERSONNEL WARNING:T h i s a p p l i a n c e m u s t b e i n s t a l l e d o n l y b yauthorised personnel and in accordance withAS5601 (AG 601), the manufacturers installationi n s t r u c t i o n s , r e l e v a n t m u n i c i p a l b u i l d i n gr e g u l a...
Page 7 - ) ELECTRICAL CONNECTION
INSTALLATION 7 7) GAS CONNECTION The gas connection is located at the rear and on theunderside of the appliance 100 mm from the righthand side. Natural Gas Natural Gas installations require the connection of agas regulator at the appliance.A s s e m b l e t h e r e g u l a t o r ( n o t i n g t h e ...
Page 8 - REGULATION
8 REGULATION Warning:Adjustment of this appliance shall only becarried out only by authorised personnel. 9) BURNERS PRIMARY AIR ADJUSTMENT (refer figure 18) - Turn off power and unplug electric lead from power point. - Remove the knobs “M”.- Unscrew the screws “V”.- Lift the control panel.Ignite the...
Page 9 - CONVERSIONS; BURNER ARRANGEMENT ON THE HOB; 1) REPLACEMENT OF INJECTORS
N° DESCRIPTION MJ/h W 9 CONVERSIONS BURNER ARRANGEMENT ON THE HOB HEAT INPUT BURNERS GAS LARGE Propane 2.75 9.00 90 11.2 3100 1 LEFT FRONT Natural 1.00 9.00 150 11.2 3100 MEDIUM Propane 2.75 9.00 90 10.2 2950 2 RIGHT REAR Natural 1.00 9.00 145 10.2 2950 SMALL Propane 2.75 9.00 60 4.9 1450 3 LEFT REA...
Page 10 - MAINTENANCE; 2) REPLACEMENT OF COMPONENTS
10 MAINTENANCE Warning:M a i n t e n a n c e , s e r v i c e a n d r e p a i r s o f t h i sappliance shall only be carried out only byauthorised personnel. 12) REPLACEMENT OF COMPONENTS NOTE:B E F O R E A N Y M A I N T E N A N C E R E Q U I R I N GR E P L A C E M E N T O F A C O M P O N E N T I SU ...
Page 11 - HOT PLATES TECHNICAL DATA
HOT PLATES TECHNICAL DATA 11 FIG. 29 FIG. 30 PRESSURE PROPANE NATURAL 3 + 1 WOK BURNERS “SOFT ” 3 + 1 WOK BURNERS “RECTANGULAR ” 24658 G-m 4 BURNERS (NO WOK) “RECTANGULAR ” 2.75 kPa 1.00 kPa 2.75 kPa 1.00 kPa 2.75 kPa 1.00 kPa TOT. HEAT INPUT TOT.NOMINAL CONSUMP. 0.6 W 0.6 W 0.6 W PROPANE NATURAL 33...
Page 12 - AUSTRALIA PTY LTD
ANDI-CO AUSTRALIA PTY LTD ABN 68 005 899 365 12 Melbourne Head Office: 1 Stamford Road, OAKLEIGH VIC 3166 Tel: (03) 9569 1255, Fax: (03) 9569 1450 Sydney Office: 97 Rose Street, CHIPPENDALE NSW 2008 Tel: (02) 9380 8444 Brisbane Office: Unit 2/44 Leonard Street, WOOLLOONGABBA QLD 4102 Tel: (07) 3891 ...