Page 3 - Contents
3 Contents Safety warnings 4 For the User 4 For the Installer 4 Description of the Appliance 6 Extractor version 6 Filter Version 6 Control Panel 7 Maintenance and care 8 Cleaning the hood 8 Metal grease filter 8 Removing the metal grease filter 8 Charcoal filter 10 Changing the light bulb 11 What t...
Page 4 - Safety warnings; For the User
4 Safety warnings For the User • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal firedcookers it is essential to avoid open flam...
Page 6 - Description of the Appliance; Extractor version
6 Description of the Appliance • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter • You will need an original AEG charcoal filter for this function (Available from your local AEG Service Force Centre). Extractor version • The air...
Page 7 - Control Panel
7 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated.Turn the hood on a few minutes before you start cooking, you willthen get an under pressure in the kitchen. The hood should be left onafter cooking for about 15 m...
Page 8 - Maintenance and care; Cleaning the hood; Metal grease filter; Open the metal grease filter
8 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild deter- gent. • Never use corrosive, abrasive or flammable cleaning products.• Never insert ...
Page 10 - Charcoal filter
10 Charcoal filter • The charcoal filter should only be used if you want to use the hood in its filtering function. • To do this you will need an original AEG charcoal filter.• Replacing the charcoal filter The charcoal filters cannot be cleaned, we recommend that theyshould be replaced approximatel...
Page 12 - What to do if
12 What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... Check that:The hood is connected to theelectricity supply.Check that the fan speed control isset to 1, 2 or 3. The cooker hood is not working Check that...
Page 14 - Guarantee conditions
14 Guarantee conditions AEG offer the following guarantee to the first purchaser of this appliance.1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified bypurchase invoice or similar documentation. The guarantee doe...
Page 16 - Technical Specifications; Mounting accessories included
16 Technical Specifications Models 2460 D Dimensions - extractor version (in cm): Height 68-113 Width 59,8 Depth 45 Dimensions - filter version (in cm):Height 67,5-122,5 Width 59,8 Depth 45 Maximum absorbed power: 195 W Motor absorption: 1 x 155 W Lighting: 2 x 20W Length of the cable: 150 cm Mounti...
Page 17 - Electrical connection; Safety warnings for the electrician
17 Electrical connection Safety warnings for the electrician The electric outlet should be placed inside the chimney.The hood has apower cable, 150 cm, with earth connection and the rated voltage is220 - 240 V. Connect the hood to the mains supply via a double pole switchwhich has 3 mm minimum separ...