AEG 2252 F - Manuals

8 ● Wash small items such as socks, laces, washable belts etc in a washing bag orpillow case as it is possible for such items to slip down between the tub andthe inner drum. ● Do not use your washing machine to wash articles with whalebones, materialwithout hems or torn material. ● Always unplug the...

9 Safety information ● Before washing, ensure that all pockets are empty and buttons and zips arefastened. Avoid washing frayed or torn articles and treat stains such as paint,ink, rust, and grass before washing. Underwired bras must NOT be machinewashed. ● Garments which have been in contact with v...

Product description Your new appliance meets all modern requirements for effective treatment oflaundry with low water, energy and detergent consumption.The ECO valve system allows total use of detergent and reduces water consumption so saving energy. Detergent dispenser drawer Compartment for prewas...

Control panel Henceforth, the programme selector dial, the different buttons and theprogramme progress display will be indicated in all the book with the relevantnumbers given in the table above. First Use Ensure that the electrical and water connections comply with the installationinstructions. Rem...

12 Use Personalization Acoustic signals The machine is provided of an acoustic device, which sounds in the followingcases: ● at the end of the cycle ● in the event of operating problems By pressing the 3 and 4 buttons simultaneously for about 6 seconds, the By pressing these 2 buttons again, the aco...

Measure out the detergent and the fabric softener Your new appliance was designed to reduce water, energy and detergent consumption . 1. Pull out the dispenser drawer until itstops. Measure out the amount ofdetergent required, pour it into the mainwash compartment and, if you wish to carry out the p...

Select the Prewash option Select this option if you wish your laundry to be prewashed at 30°C before themain wash. The prewash ends with a short spin in programmes for cotton andsynthetic fabrics, whereas in the programmes for delicate fabrics the water isonly drained. The relevant light will light ...

Alarm codes In the event of operating problems, some alarm codes can be displayed, forexample E20 (see paragraph «Something not working»). End of programme When the programme has finished a flashing zero is displayed, the Door pilot light and the light of button 7 go out and the door can be opened. ...

17 Use Select an additional rinse This appliance is designed for saving water. However, for people with a verydelicate skin (allergic to detergents) it may be necessary to rinse the laundryusing an extra quantity of water (extra rinse). Press simultaneously the buttons 2 and 3 for some seconds: the ...

At the end of the programme The machine stops automatically, the light of the button 7 goes off, the buzzer sound and a flashing 0 will appear on the display. If the Rinse Hold option have been selected, the Door pilot light illuminates, a flashing 0 will appear on the display, the light of the butt...

* Stain option can be selected only at the temperature of 40°C or higher. ** Time Saving option cannot be selected with 40-60 MIX programme. 19 Washing programmes Washing programmes P Prro og grraam mm mee// TTeem mp peerraattu urree TTyyp pee o off llaau un nd drryy O Op pttiio on nss D Deessccrrii...

20 Washing programmes Washing programmes P Prro og grraam mm mee// TTeem mp peerraattu urree TTyyp pee o off llaau un nd drryy O Op pttiio on nss D Deessccrriip pttiio on n o off p prro og grraam mm mee Delicate rinses(FeinspülenRinçages) Separate rinse cycle forhand washed items. Spin red./Rinse Ho...

21 Programme information ECONOMY This programme can be selected for slightly or normallysoiled white and fast colour cotton items. The temperaturewill decrease and the washing time will be extended. Thisallows to obtain a good washing efficiency by savingenergy. OFF/O To reset a programme and to swi...

Preparing the wash cycle Sorting out the laundry Follow the wash code symbols on each garment label and the manufacturer’swashing instructions. Sort the laundry as follows: whites, coloureds, synthetics,delicates, woollens. Temperatures Before loading the laundry Never wash whites and coloureds toge...

23 Preparing the wash cycle Maximum loads Recommended loads are indicated in the washing programme charts. General rules: Cotton, linen: drum full but not too tightly packed; Synthetics: drum no more than half full ; Delicate fabrics and woollens: drum no more than one third full. Washing a maximum ...

Removing stains Stubborn stains may not be removed by just water and detergent. It is thereforeadvisable to treat them prior to washing. Blood: treat fresh stains with cold water. For dried stains, soak overnight in water with a special detergent then rub in the soap and water. Oil based paint : moi...

25 Preparing the wash cycle ● powder detergents for delicate fabrics (60°C max) and woollens, ● liquid detergents, preferably for low temperature wash programmes (60°Cmax) for all types of fabric, or special for woollens only. The detergent and any additives must be placed in the appropriatecompartm...

26 International wash code symbols International wash code symbols These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry. Energetic wash Delicate wash Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max. wash temperatur...

Care and cleaning You must DISCONNECT the appliance from the electricity supply, before you cancarry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use awater softening powder in the machine. Do this separately from any laun...

2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5. Clean all parts of the washing ma-chine, especially the nozzles in the topof the washing-in chamber, with abrush. 6. I...

29 Care and cleaning 4. Place a container close to the pump tocollect any spillage. 5. Release the emergency emptying hose,place it in the container and remove itscap. 6. When no more water comes out,unscrew the pump and remove it.Always keep a rag nearby to dry upspillage of water when removing the...

30 Care and cleaning Warning! When the appliance is in use and depending on the programme selected therecan be hot water in the pump. Never remove the pump cover during a washcycle, always wait until the appliance has finished the cycle, and is empty. Whenreplacing the cover, ensure it is securely r...

Frost precautions If the machine is installed in a place where the temperature could drop below0°C, proceed as follows: 1. Close the water tap and unscrew the water inlet hose from the tap. 2. Place the end of the emergency emptying hose and that of the inlet hose in abowl placed on the floor and le...

32 Something not working Something not working Certain problems are due to lack of simple maintenance or oversights, which can besolved easily without calling out an engineer. Before contacting your local Service Centre,please carry out the checks listed below. During machine operation it is possibl...

34 Something not working No water is visible in the drum: Machines based on modern technology operate veryeconomically using very little water without affectingperformance. Problem Cause possible/Solution The door will not open: The programme is still running.• Wait the end of washing cycle. The doo...

35 Technical data Techinical Data Dimensions WidthHeightDepth(door included) 60 cm85 cm63 cm Electrical connection Voltage -Overall power - Fuse Information on the electrical connection is given on the ratingplate on the inner edge of the appliance door Water supply pressure MinimumMaximum 0,05 MPa0...

36 Consumption value The consumption data shown on this chart is to be considered purely indicative, asit may vary depending on the quantity and type of laundry, on the inlet watertemperature and on the ambient temperature. It refers to the highest temperaturefor each wash programme. (*) «Cottons Ec...

Installation Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all transit devices so that they can be refitted if themachine ever has to be transported again. 1. After removing all the packaging, carefully laymachine on it’s back to remove t...

Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets,rugs etc. Before placing it on small tiles, apply a rubber coating. Never try to correct any unevenness in the floor byputting pieces of wood, cardboard or ...

3. Set the hose correctly by loosening the ring nut.After positioning the inlet hose, be sure to tightenthe ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4” thread.Always use the hose supplied with the appliance. Installation should comply with local water authorityand build...

Important! The drain hose may be extended to a maximum of 4 metres. An additional drain hose andjoining piece is available from your local Service Centre. Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical install...

Enviroment concerns Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene>PP<=polypropyleneThis means that they can be recycled by disposing of them properly inappropriate collection containers. Old machine Use authorised dispos...