AEG 115DD-M- Manuals

Page 3 - Table of contents; Content; For the user

3 Table of contents Content Page no. For the user Your new aplliance ....................................................................................... 2 Safety information ........................................................................................ 4 Description of the product .......

Page 4 - Safety information; Installing; Child Safety

4 Safety information These warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the appliance. Your safety is of paramount importance. If you are unsure about the meaning of these warnings contact the Customer Care Department for assistan...

Page 5 - Description of the product

5 The functions of the worktop extractor The air is sucked through the grease filter and then blown via the vent hose to the vent duct and out into the atmosphere. As opposed to an ordinary extractor, the worktop extractor is placed next to the cooker. The worktop extractor can be adjusted to two he...

Page 6 - Pilot light

6 Pilot light The pilot light is located on the front of the product. The pilot light comes on when the product is switched on and extinguishes when the product is switched off. The extraction capacity of the worktop extractor The extraction capacity is 370m³/h at the high extraction speed and 211m³...

Page 10 - Cleaning and maintenance

10 Cleaning and maintenance Before carrying out any maintenance or cleaning isolate the extractor from the mains supply. The extractor must be kept clean as build up of grease or fat can be a fire hazard The splashguard can be removed to make it easier to clean the surface. What to do:1. Hold the sp...

Page 13 - Fitting

13 The worktop extractor can be fitted in any type of kitchen worktop with a thickness of between 28 and 40 mm. Location It is recommended that you install the worktop extractor in continuation of the hob. If two or more hobs are installed, the worktop extractor should be placed between the units so...

Page 15 - Installation

15 Installation This extractor unit must be installed according to the instructions supplied. Any electrical installation work must be undertaken by a qualified electrican/competent person. Do not alter the specifications or attempt to modify the appliance in any way. The ducting system for this app...

Page 16 - Connection

16 The connection must be completely tight regardless of the connection chosen. To install cable, remove front cover as shown. Connection Min. cable dimension: 0.75 mm²Cable type: HO5VV-F IMPORTANTInstallation next to a gas unit To install the work top extractor next to a gas hob, proceed as follows...

Page 17 - Transport damage

17 Technical specifications Electrical connections: Voltage: 240 V Max. power used: 90 watts Electrical connection: 1 phase, neutral and earth Maximum extraction speed: 370 m 3 /h Minimum extraction speed: 211 m 3 /h Outlet connection: Round duct or hose: Ø 125 mm Square duct: 100 x 150 mm 132 433 1...

Page 18 - Service; Before calling service – technical advice

18 Service Symptom The worktop extractor is not working Remedy Check the worktop extractor plugged in and the electrical supply is swithced on. Check that the R.C.C.B. has not triped (if fitted) Check that main has no blown. Before calling service – technical advice