Adesso 2100 Series - Manuals

7. Scanning Mode Selection Note: The default setting of the barcode scanner is on Trigger Mode. Do not program the barcode scanner unless necessary. Start All program setup must start with reading the “Start” label, and reading the “ End of Configuration ” label to save any changes. Trigger Mode (De...

8. Beeper Mode Selection Note: The Tone and Duration default setting of the barcode scanner is on Medium. Do not program the barcode scanner unless necessary. Start All program setup must start with the “Start” label, and reading the “ End of Configuration ” label to save any changes. Tone High Medi...

9. Default Parameters These tables give the default settings of all the programmable parameters. DEFAULT VALUES OF OPERATING PARAMETERS Function Default Values Scanning Mode Selection Trigger mode Header and trailer None Inter-Message delay Normal Inter-Character delay Normal Message/Block mode sele...

OPERATIONAL Light Source 617 nm visible red LED Optical System 2,500 pixels CCD Depth of Field 0 up to 6 inch (UPC/EAN 100%, PCS=90%) Scan Angle 42° Scan Rate 125 scans per second Minimum Bar Width 0.125 mm (5 mil) (0.1 mm actually) (Code 39, PCS=90%) Print Contrast Min. 30% @ UPC/EAN 100% Indicator...

If you need to make changes in the configuration of the scanner for specific applications, a full Programming Guide can be downloaded at: http://www.adesso.com/PDF%20files/NUSCAN2100usersguide.pdf 13. Trouble Shooting a. Problem: Nothing happens when you follow the operating instructions. Possible C...