ADC T1MF2S04RA - Manuals

List of Tables LTPH-UM-1261-01 vii Table 1-1. HMS-318 List 3 Shelf Rear-Panel Connections (LPS-300C) .............................. 1-4 Table 1-2. Alarms Wire-wrap Field Functional Description .................................................. 1-7 Table 1-3. J26 – RS-232/X.25 Management Port (DTE) ....

LTPH-UM-1261-01 ix A BOUT T HIS M ANUAL I NTRODUCTION This manual provides essential information about the HiGain ® Management Shelf (HMS-318 List 3) along with step- by-step instructions on how to install the shelf into a Central Office (CO) or telco-style equipment rack. A UDIENCE This manual is w...

About This Manual December 20, 2004 x LTPH-UM-1261-01 C ONVENTIONS The following style conventions and terminology are used throughout this guide. Appendix A: Signal and Pin Assignments Lists Tip and Ring signal and pin assignments to the HMS-318 List 3 shelf, including: • P1-DSX-1 Receive or xDSL B...

December 20, 2004 About This Manual LTPH-UM-1261-01 xi EU C OMPLIANCE The product complies with the requirements of the Low Voltage Directive 73/23/EEC, EMC Directive 89/336/EEC, and the R&TTE Directive 1999/5/EC Articles 3.1a and 3.1b. S AFETY G UIDELINES The following safety guidelines are pre...

About This Manual December 20, 2004 xii LTPH-UM-1261-01 I NSPECTING Y OUR S HIPMENT Upon receipt of the equipment: • Unpack each container and visually inspect the contents for signs of damage. If the equipment has been dam- aged in transit, immediately report the extent of damage to the transportat...

LTPH-UM-1261-01 1-1 1 Chapter P RODUCT D ESCRIPTION The HMS-318 L3 is a 22-slot, 3190 mechanics shelf that is capable of being managed locally or remotely. It can be mounted in a 19-inch rack and is fully NEBS 3 and UL-60950 complaint. The ADC HiGain ® Management Shelf (HMS-318 List 3) weighs approx...

Chapter 1: Product Description December 20, 2004 1-2 LTPH-UM-1261-01 T YPICAL HMS-318 L IST 3 S HELF A PPLICATIONS Capable of using various components in different types of applications, the HMS-318 List 3 shelf is designed as a very adaptable shelf. It can be used in the following applications: • M...

Chapter 1: Product Description December 20, 2004 1-4 LTPH-UM-1261-01 Table 1-1. HMS-318 List 3 Shelf Rear-Panel Connections (LPS-300C) Connector/Terminal Block Connector Type Connectory Label Description J24 BNC-T (Female) 10 BASE-2 10BASE-2 Management Port J25 RJ-45 10 BASE-T 10BASE-T Management Po...

December 20, 2004 Chapter 1: Product Description LTPH-UM-1261-01 1-5 P OWER AND A LARM C ONNECTIONS The HMS-318 List 3 shelf has a separate split input power (TB1) and an Alarms wire-wrap field (TB2). The following paragraphs provide information about TB1 and TB2. Safety Precautions Observe the foll...

Chapter 1: Product Description December 20, 2004 1-6 LTPH-UM-1261-01 Alarms Wire-Wrap Field Terminate the alarm leads from the CO alarm system to the HMS-318 List 3 shelf. The Alarms wire-wrap field (TB2, see Figure 1-2 ) is a 26-pin wire-wrap connector and provides a central connection point to the...

December 20, 2004 Chapter 1: Product Description LTPH-UM-1261-01 1-7 In the HMU/HLU configuration, for example, for detailed information about the different types of alarms, refer to the “Managing Alarms” section in the HMU-319, H2TU-C-319, or H4TU-C-319 User Manuals . Specifically, the manual descr...

Chapter 1: Product Description December 20, 2004 1-8 LTPH-UM-1261-01 C ONNECTING TO HDSL, HDSL2, AND HDSL4 C IRCUITS The following paragraphs provide information on making DSX-1 and HDSL, HDSL2, and HDSL4 connections to the HMS-318 List 3 shelf. Plug-in Connections DSX-1 and HDSL, HDSL 2, or HDSL4 D...

Chapter 1: Product Description December 20, 2004 1-10 LTPH-UM-1261-01 Figure 1-7. HLU Slot Wire-wrap Pinouts for HDSL4 Circuits C ONNECTING S PAN P OWERED X DSL C IRCUITS TO THE HMS-318 L IST 3 S HELF The following paragraphs provide information on making Span Powered xDSL connections to the HMS-318...

Chapter 1: Product Description December 20, 2004 1-12 LTPH-UM-1261-01 RS-232/X.25 R EMOTE M ANAGEMENT P ORTS Two EIA RS-232 communications ports, J26 (labeled OS RS232 PORT) and J27 (labeled AUX RS232 PORT), located on the HMS-318 List 3 shelf rear panel (see Figure 1-9 on page 12 ), provide optiona...

Chapter 1: Product Description December 20, 2004 1-14 LTPH-UM-1261-01 Figure 1-11 shows a typical example of a CO equipment rack layout using HMS-318 List 3 shelves. The figure shows a rack with a fuse panel, eight HMS-318 List 3 shelves, each separated by a two rack space baffle with the remaining ...

December 20, 2004 Chapter 1: Product Description LTPH-UM-1261-01 1-15 A IR F LOW G UIDELINES To ensure adequate air flow through the telco-style equipment rack, it is recommended that you maintain a clearance of at least 6 inches (15.2 cm) in the front and the back of the rack at all times. If airfl...

LTPH-UM-1261-01 2-1 2 Chapter I NSTALLATION This section provides specific information about preparing your site for installation. Included are specific preparatory information, safety guidelines, specific rack-mounting guidelines, adapter bracket mounting, rack mounting, DSX and HDSL or Span Powere...

Chapter 2: Installation December 20, 2004 2-2 LTPH-UM-1261-01 Unpacking and Checking the Contents of your Shipment The shipping package for the HMS-318 List 3 is designed to reduce the possibility of product damage associated with routine material handling experienced during shipment. To reduce the ...

December 20, 2004 Chapter 2: Installation LTPH-UM-1261-01 2-3 Required Tools The following tools are required to install the shelf: • Grounding or ESD-preventive wrist strap • #2 Phillips-head screwdriver • #1 Phillips-head screwdriver • Straight-slot-head screwdriver • Cable preparation tools • A 5...

Chapter 2: Installation December 20, 2004 2-4 LTPH-UM-1261-01 S AFETY G UIDELINES The safety guidelines (see Chapter 1: “Safety Guidelines” on page 1-iv ) are provided to help ensure your safety and to protect your equipment. The list on page iv may not identify all potentially hazardous situations ...

December 20, 2004 Chapter 2: Installation LTPH-UM-1261-01 2-5 Adapter Bracket Mounting Procedure (19-inch Telco-style Equipment Rack) Adapter bracket placement depends on the type of telco-style rack you plan to use to install the HMS-318 List 3 shelf. First, check the mounting adapter brackets on t...

Chapter 2: Installation December 20, 2004 2-6 LTPH-UM-1261-01 Adapter Bracket Mounting Procedure (ETSI-style Equipment Rack) To mount the adapter brackets for a 600-mm ETSI-style Equipment Rack, mount the HMS-318 List 3 shelf to the adapter brackets as described in this procedure. Perform the follow...

December 20, 2004 Chapter 2: Installation LTPH-UM-1261-01 2-7 Rack Mounting Procedure To secure the HMS-318 List 3 shelf to the telco-style rack, you must use the mounting screws provided or follow your local practices for installing the shelves into your telco-style equipment rack. Ensure that the ...

Chapter 2: Installation December 20, 2004 2-8 LTPH-UM-1261-01 DSX and HDSL Connector Procedure S PAN P OWERED X DSL C ONNECTIONS Perform the following procedure to connect the Span Powered xDSL interface cables to connectors P1, P2, P3 and P4 (see Figure 1-2 on page 1-3 for connector location and “C...

December 20, 2004 Chapter 2: Installation LTPH-UM-1261-01 2-11 Power and Frame Ground Procedure Figure 2-2. Input Power Terminal Block (TB1) Alarms Procedure ! IMPORTANT To avoid voltage differences from building up between the shelf ground (GND) bus and the ground pins of the management terminal th...

Chapter 2: Installation December 20, 2004 2-12 LTPH-UM-1261-01 Optional Fan Alarm Procedure Figure 2-3. Alarms Wire-wrap Field (TB2) Note: The FAN terminals wire-wrap field provides access to the Normally Open (NO), Form A fan relay contact located on the HMU-319 management unit. A temperature monit...

December 20, 2004 Chapter 2: Installation LTPH-UM-1261-01 2-13 I NSTALLING THE HMU-319 WITH HLU-319, H2TU-C-319, H4TU-C-319 Install the line units (HLUs) into slots 1 through 22 and the HMU-319 management unit into slot 23 of the HMS-318 List 3 shelf (see “HMS-318 List 3 Shelf - Front View” on page ...

Chapter 2: Installation December 20, 2004 2-14 LTPH-UM-1261-01 Install LPS-300C Procedure ATTENTION Use anti-static wrist-straps connected to the ESD Jack (located on the right adapter bracket, see Figure 1-1 on page 1-2) when inserting a circuit card. Avoid touching components on the circuit card. ...

LTPH-UM-1261-01 A-1 A Appendix S IGNAL AND P IN A SSIGNMENTS The Tip and Ring signal and pin assignments to the HMS-318 List 3 shelf are: • P1-DSX-1 Receive or xDSL B IN, Tip and Ring (see Table A-1 ) • P2-DSX-1 Transmit or xDSL A IN, Tip and Ring (see Table A-2 on page A-2 ) • P3-HDSL Span 1 or xDS...

Appendix A: Signal and Pin Assignments December 20, 2004 A-2 LTPH-UM-1261-01 Connector P2 - DSX-1 Transmit or Span Powered xDSL (xDSL A IN) Table A-2 provides signal and pin assignment information for making DSX-1 transmit or Span Powered xDSL (xDSL A IN) circuit connections to the HMS-318 List 3 sh...

LTPH-UM-1261-01 B-1 B Appendix S TANDARD PIC C OLOR C ODE This appendix lists the standard PIC color codes in tabular format with the Pair Number cross-referenced with the colors of the Tip and Ring wires used by the installer. Table B-1. Standard PIC Color Code Pair Number Tip Ring 1 White Blue 2 W...

Appendix B: Standard PIC Color Code December 20, 2004 B-2 LTPH-UM-1261-01

LTPH-UM-1261-01 C-1 C Appendix C IRCUIT C ARD P REVENTIVE M EASURES This appendix describes the preventive measures that should be observed for the following: • Handling and storing of circuit cards. • Installing/replacing circuit cards sensitive to static electricity. H ANDLING C IRCUIT C ARDS Dama...

Appendix C: Circuit Card Preventive Measures December 20, 2004 C-2 LTPH-UM-1261-01 Circuit Card Ejector Tab or Built-in Thumb Hold Most circuit cards have an ejector tab that is used to assist the installer in inserting and removing each circuit card. These ejector tabs are typically located at eith...

LTPH-UM-1261-01 D-1 D Appendix S PECIFICATIONS Power Requirements CO Battery Voltage -48 Vdc nominal (-42.5 Vdc to -56.5 Vdc) Fuse Maximum 15 A a Compliance NEBS GR-63-CORE, Issue 2 GR-1089-CORE, Issue 3 SR-3580, Level 3 Safety UL/cUL 60950-1 UL/cUL 60950-21 EN 60950-1:2001 EN 60950-21:2003 EMC EN 3...

Appendix D: Specifications December 20, 2004 D-2 LTPH-UM-1261-01 Accessories Supplied Brackets (attached at factory) for mounting in either 19-inch (48.3 cm) or 23-inch (58.4 cm) bays Brackets for mounting in ETSI rack Accessories Available Extender Bracket Kit: available in three colors: EB-52, gra...

LTPH-UM-1261-01 E-1 E Appendix P RODUCT S UPPORT ADC Customer Service Group provides expert pre-sales support and training for all of its products. Technical support is available 24 hours a day, 7 days a week by contacting the ADC Technical Assistance Center. Sales Assistance: 800.366.3891 Quotation...

Appendix E: Product Support December 20, 2004 E-2 LTPH-UM-1261-01

LTPH-UM-1261-01 GL-1 G LOSSARY A ACO – Alarm Cutoff AUD – Audible (alarm) AUX – Auxiliary port AWG – American Wire Gauge C CLEI – Common Language Equipment Interface CO – Central Office COM – Common CRIT – Critical (alarm) D DSL – Digital Subscriber Loop DSX-1 – DS-1 Cross-connect frame E E1 – 2.048...

Glossary December 20, 2004 GL-2 LTPH-UM-1261-01 O OS port – Operator Services port P PIC – Plastic Insulated Conductor R RCV – Receive RMA – Return Material Authorization RX – Receive S SYS ID – System Identifier (alarm) T T1 – 1.544 Mbps data rate (North American) V VIS – Visible (alarm) W WECO – W...

Certification and Warranty FCC Class A Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference whenthe equipment is operate...

World Headquarters ADC Telecommunications, Inc.PO Box 1101Minneapolis, MN 55440-1101 USA For Technical Assistance Tel: 800.366.3891 HiGain ® Managed Shelf 19-inch, 3190 Mechanic, 22-Slot Managed CO Shelf (HMS-318 List 3)User Manual Document Number: Product Catalog: HMS-318 List 3 LTPH-UM-1261-01 CLE...