A&D UT-302PBT - Manuals

6 Tips for Measuring Human Temperature Bear in mind that the thermometer needs to have been in the room in which the measurement is taken for at least 30 minutes before use. • S ome people produce different readings in their left and right ear. In order to record temperature changes, always measure ...

Measuring Body Temperature in the Ear 2. Press the Power button to switch the thermometer on. Following a successful self test, the device emits two short beeps. 3. Make sure that the sensor tip and also the ear canal are clean. As the ear canal is slightly curved, you have to pull the ear slightly ...

Measuring Body Temperature in the Ear 9 The Readings: If the temperature measurement is below 38°C, a “Smiling Face ” will be appear next to the reading. If the reading is 38°C or above, a “Frowning Face ” will be displayed.

1. While in power on mode, press once briefly on the “Memory” button, then pass it again to show the last measurement accompanied by “ ” symbol. 2. Continue to press the “Memory” button to view the next previously stored measurement, so “ ” then all the way to “ ”. 10 Memory Function You can recall ...

11 Operating The Bluetooth Function 1. Turn the ear thermometer to the back side. 2. Turn on the wireless power (From "off" to "on"), while the thermometer searches for other Bluetooth compatible devices, the LED (connection indicator) will flash. When the device connects successfull...

12 Operating The Bluetooth Function What You Need : The host computer or terminal system to run Serial Port Profile (SPP) - A personal computer with Operating system: Windows 95 or later - A Smart Phone with Android system - Others: PDA, etc. Please refer to the instruction manual of your personal c...

13 Operating The Bluetooth Function Communications Interface: To connect to a new device (new master) the must be out of range from the previous master or unpaired from that master. UT-302PBT Using Bluetooth communications terms, the UT-302PBT is a slave device. To connect the UT-302PBT to a master ...

14 Care and Maintenance • Clean the probe and tip with an alcohol swab before and after each measurement. Probe and Tip: • Use a soft, dry cloth to clean thermometer body. Never use abrasive cleaning agents, thinners or benzene for cleaning. Do not scratch the surface of the probe lens or the displa...

• 34°C~43°C (93.2°F~109.4°F) • 35.5°C~42°C (95.9°F~107.6°F): outside the range: • 16 C~35 C (60.8 F~95 F) with relative humidity up to 85% (non condensing) • -25 C~+55 C (-13 F~+131 F) with relative humidity up to 85% (non condensing) • 0.1 C or F • 2 x 1.5 V AAA alkaline batteries • approx. 70g (wi...

16 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, use...