A&D UC-324NFC - Manuals

4 Installing (or Replacing) the Batteries Caution Insert each battery with its positive ( + ) and negative ( - ) terminals properly aligned with the corresponding symbols in the battery compartment. Improper installation of the batteries may cause battery leakage. Replace all four batteries with new...

5 Setting the Unit Setting the unit manually 1. Confirm that the scale is turned off. Press the SET switch. The scale beeps and displays the unit currently set. 2. Press the SET switch to select the unit. 3. After three seconds of non-operation, the scale confirms the selected unit with two beeps, d...

6 Measuring Your Weight Using the NFC Function After measurement, the communication device receives the data. 1. Confirm that the scale is turned off. Step on the scale gently and stand still during the measurement. The scale turns on, displays all of the display segments. 2. Wait the finish of the ...

8 Caution on Using the NFC Function The scale has an NFC Forum Type 3 Tag wireless interface module built in. When the scale is used near wireless communication devices which use the same frequency as that of the scale (13.56 MHz) or use its harmonic frequencies, electromagnetic interference may occ...