Page 2 - Display Unit
2 Features & Benefits Display Unit 37 20 2 1 5 19 21 22 23 2425 26 27 28 29 303132 33 34 7 9 10 11 12 38 39 35 12 16 15 14 14 17 13 18 6 4 3 36 8
Page 4 - Back of Display Unit; BACK OF DISPLAY UNIT; Integrated Hang Hole
4 Back of Display Unit 1 2 BACK OF DISPLAY UNIT 1. Integrated Hang Hole for easy wall mounting 2. Plugin for Power Adapter3. A-B-C Switch ID code that must match 5-in-1 sensor’s A-B-C switch to ensure units synchronize 4. CLEAR TODAY Button Clears data recorded since 12:00am 5. CLEAR ALL Button Clea...
Page 5 - Display Unit Setup; Install or Replace Batteries; A B C
5 Display Unit Setup The display unit operates with batteries and/or power adapter. Regardless of the power source, it is recommended that batteries always be installed to ensure continuous operation (and retain records) in case of a power outage. Set the A-B-C Switch The A-B-C switch is located ins...
Page 7 - Select Measurement Units
7 Select Measurement Units To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):1. Press the“ ▲ ” or “ ▼ ” buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit. 2. Press the “SET” button to set the unit preference. 3. Press the “ ▲ ”...
Page 8 - Placement for Maximum Accuracy; Display Unit Placement; Important Placement Guidelines; MAXIMIZE WIRELESS RANGE
8 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and ...
Page 9 - OPERATION; ready for superior weather prediction.; Weather Forecast; personalized for your exact location.; Weather Select; press the “; Rainfall Event
9 OPERATION Using the Professional Weather CenterLearning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this po...
Page 10 - Additional Messages Include:; Adjust the Weather Ticker Speed; ” or “; Weather Ticker
10 Additional Messages Include: NEW HIGH TEMPERATURE RECORDNEW LOW TEMPERATURE RECORDNEW WIND SPEED RECORD TODAYCURRENT RAINFALL RATECURRENT RAIN EVENT STARTED NO RAIN RECORDED SINCE ____WEATHER ALARM MESSAGESSENSOR BATTERIES LOWSENSOR SIGNAL LOST Adjust the Weather Ticker Speed 1. Press the “ ▲ ” o...
Page 11 - Customize Weather Ticker Messages; current scrolling message. The corresponding “ ” appears on screen
11 Customize Weather Ticker Messages Customize which messages you want to scroll across the WEATHER TICKER:1. Press the “ ” button to manually cycle through each message available.2. During the MANUAL REVIEW: PRESS the “ ” button to activate the current scrolling message. The corresponding “ ” appea...
Page 12 - Programmable Weather Alarms; Set a Weather Alarm
12 Programmable Weather Alarms Each Selectable Weather Category features an alarm option. When an alarm sounds, the display unit emits audible beeping and flashes the affected category, its alarm settings, and any other relevant data. Some alarms can be customized to alert you when your programmed v...
Page 13 - Silence a Sounding Alarm
13 Silence a Sounding Alarm The alarm sounds initially for a few minutes, then silences itself. The alarm then sounds every few minutes afterwards until one of the following happens:1. “SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm condition reoccurs.2. Turn alarm “OFF” -...
Page 14 - Display Unit Care
14 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. CalibrationCalibrate Temperature & Humidity The indoor / outdoor temperature a...
Page 15 - FCC Information; Specifications
15 FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions: 1- This device may NOT cause harmful interference, and 2- This device must accept any interference received, including interference that may cause undesired operation. This equipm...
Page 16 - For assistance; AcuRite
16 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...