Actiontec 802UIG - Manuals

2 Action tec 54 Mbps Wireless USB Adapter User Manual Features s IEEE 802.11 b and 802.11 g standards conformity s USB interface ( USB 1.1 [ 11 Mbps max.], 2.0 [ 54 Mpbs max.] compatible) s WEP , WPA , WPA_PSK , and 802.1 x support Technical Support Action tec Electronics prides itself on making dur...

3 Understanding the Wireless Network Wireless local area networks ( WLAN ) perform the exact same functions as wired local area networks ( LAN ). Each computer in the WLAN uses a data radio device to connect to the network, and all computers in the network share the same frequen-cy and method for id...

4 Action tec 54 Mbps Wireless USB Adapter User Manual Infrastructure Mode Infrastructure mode is a networking framework where devices communicate with each other by first going through an access point or wireless router/gateway. Infrastructure mode lets wireless devices communicate with each other o...

5 Setting Up the Adapter The instructions that follow in this chapter parallel the steps contained in the Action tec Connection 1-2-3 ® setup utility, which provides a visual, step-by-step guide to setting up the USB Adapter. It is recommended the user run Connection 1-2-3 first, before attempting a...

6 Action tec 54 Mbps Wireless USB Adapter User Manual 7 Chapter 3 Setting Up the Adapter 2. Get the USB cable and Adapter from the box, then click on Next . 3. Plug the smaller end of the USB cable into the port on the front of the Adapter, then click Next .

6 Action tec 54 Mbps Wireless USB Adapter User Manual 7 Chapter 3 Setting Up the Adapter 4. Plug the other end of the USB cable into the USB port located on the back of the computer. ☞ Note : After plugging in the Adapter to the computer, wait for the “Add New Hardware Wizard” to complete before cli...

11 Using the Wireless Configuration Utility To monitor the wireless network to which the USB Adapter is connected, as well as check or adjust wireless network settings, use the Wireless Configuration Utility. This Utility offers the ability to check wireless network signal strength, connect to a wir...

12 Action tec 54 Mbps Wireless USB Adapter User Manual 13 Chapter 4 Using the Wireless Configuration Utility A menu appears, displaying the Utility’s options. To select one, click on it, and the appropriate window will appear. About Selecting “About” from the Utility menu generates the “About” windo...

12 Action tec 54 Mbps Wireless USB Adapter User Manual 13 Chapter 4 Using the Wireless Configuration Utility Link Status Selecting “Link Status” from the Utility menu generates the “Link Status” window. The Link Status window provides information regarding the current status of the USB Adapter and i...

14 Action tec 54 Mbps Wireless USB Adapter User Manual 15 Chapter 4 Using the Wireless Configuration Utility Site Monitor Selecting “Site Monitor” from the Utility menu generates the “Site Monitor” win-dow. The Site Monitor window displays information regarding nearby visible access points or wirele...

14 Action tec 54 Mbps Wireless USB Adapter User Manual 15 Chapter 4 Using the Wireless Configuration Utility View Available Networks Selecting “View Available Networks” from the Utility menu generates the “Single Source Card Utility” window. This window displays the available wireless networks, allo...

16 Action tec 54 Mbps Wireless USB Adapter User Manual Advanced Clicking “Advanced” in the Single Source Card Utility window generates the “Advanced” window. Use this window to select the type of network to which the Adapter connects. Exit Selecting “Exit” from the Utility menu closes the Utility. H...

17 Troubleshooting and FAQs This chapter describes some common problems that may be encountered when using the USB Adapter, and ways to resolve the problems. Also included is a list of frequently asked questions. Troubleshooting The Adapter can’t connect to an access point. From the Network Properti...

18 Action tec 54 Mbps Wireless USB Adapter User Manual 19 Chapter 5 Troubleshooting The computer won’t detect the Adapter. Make sure the USB cable is properly connected and that the orange Power light ( PW ) is on. Also, make sure the computer’s USB drivers are properly installed. Frequently Asked Q...

18 Action tec 54 Mbps Wireless USB Adapter User Manual 19 Chapter 5 Troubleshooting Will cordless phones interfere with the Adapter? The Adapter uses the 2 . 4 GH z frequency. If your cordless phone uses this fre- quency, problems may occur. Different cordless phones use different frequen-cies, and ...

20 Action tec 54 Mbps Wireless USB Adapter User Manual How do I enable WEP in XP using the Wireless Zero Configuration Utility? First, make sure the Adapter is correctly installed in the computer. Then, in the system tray (in the lower right hand side of the desktop, next to the clock), right-click ...

21 Specifications General Model Number 802UIG ( 54 Mbps Wireless USB Adapter) Standards IEEE 802.11 b/g (Wireless) Certification FCC Part 15 CE (available for products purchased in Europe) Frequency Band 2.4 - 2.4835 GH z Interface USB Plug-N-Play (compatible with USB 1 . 1 and 2 . 0 ) Data Rate 802...

22 Action tec 54 Mbps Wireless USB Adapter User Manual LED Indicators Power ( PW ), Link Activity ( LK ) Environmental Operating Temperature 0 º C to 65 º C ( 32 º F to 149 º F ) Storage Temperature - 20 º C to 85 º C (- 4 º F to 185 º F ) Operating Humidity 0 % to 95 % (non-condensing) Storage Humi...

23 Using the Adapter with Windows XP This appendix details connecting the USB Adapter to a wireless network on a com- puter running Windows XP . Connecting to an Unsecured Access Point If the Adapter has been properly installed, a pop-up box showing the name of the available access point appears. To...

24 Action tec 54 Mbps Wireless USB Adapter User Manual 25 Appendix B Using the Adapter with Windows XP 3. The “Wireless Network Connection” window appears. From the “Available wireless networks” list box, select the network (or SSID of the access point or wireless router/gateway) with which to conne...

24 Action tec 54 Mbps Wireless USB Adapter User Manual 25 Appendix B Using the Adapter with Windows XP Connecting to a Secured Access Point To connect to a secured access point: 1. Locate the wireless network (double computer) icon corresponding to the Adapter by moving the cursor over the network i...

26 Action tec 54 Mbps Wireless USB Adapter User Manual 27 Appendix B Using the Adapter with Windows XP 3. The “Wireless Network Connection” window appears. Click Advanced . 4. When the window below appears, make sure the check box next to “Use Windows to configure my wireless network settings” is ac...

26 Action tec 54 Mbps Wireless USB Adapter User Manual 27 Appendix B Using the Adapter with Windows XP 6. The “Wireless Network Properties” window appears. The name of the network selected in step 5 is displayed in the “Network Name” text box. 7. From the Wireless Network Properties window, select t...

29 Glossary Access Point A device that allows wireless clients to connect to one another. An access point can also act as a bridge between wireless clients and a “wired” network, such as an Ethernet network. Wireless clients can be moved anywhere within the cover-age area of the access point and rem...

30 Action tec 54 Mbps Wireless USB Adapter User Manual 31 Glossary Ethernet Network A standard wired networking configuration using cables and hubs. Firewall A method preventing users outside the network from accessing and/or damag-ing files or computers on the network. Gateway A central device that...

30 Action tec 54 Mbps Wireless USB Adapter User Manual 31 Glossary PPPoE (Point-To-Point Protocol over Ethernet)/PPPoA (Point-To-Point Protocol over ATM) Methods of secure data transmission. Router A central device that manages the data traffic of the network. Subnet Mask A set of four numbers confi...

32 Action tec 54 Mbps Wireless USB Adapter User Manual Wi-Fi (Wireless Fidelity) A generic term for any kind of wireless network. WPA (Wi-Fi Protected Access) An improved version of WEP using better encryption and authentication, designed to work with existing WEP -enabled products.

33 Notices Regulatory Compliance Notices Class B Equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential i...

34 Action tec 54 Mbps Wireless USB Adapter User Manual 34 2. This device must accept any interference received, including interference that may cause unwanted operation. ☞ Note : To comply with FCC RF exposure compliance require- ments, the antenna used for this transmitter must be installed to prov...

35 Limited Warranty Hardware : Action tec Electronics, Inc., warrants to the end user (“Customer”) that this hardware product will be free from defects in workmanship and materials, under normal use and service, for twelve (12) months from the date of purchase from Action tec Electronics or its auth...

36 Action tec 54 Mbps Wireless USB Adapter User Manual THIS ACTION TEC ELECTRONICS PRODUCT MAY INCLUDE OR BE BUNDLED WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A SEPARATE END-USER LICENSE AGREEMENT. THIS ACTION TEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH THIRD- PARTY SOFTWARE. FO...

36 Action tec 54 Mbps Wireless USB Adapter User Manual 37 Limited Warranty NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF ITS PRODUCTS. ACTION TEC ELECTRONICS SHALL NOT BE LIABLE UNDER THIS WARRANT...

38 Action tec 54 Mbps Wireless USB Adapter User Manual Governing Law : This Limited Warranty shall be governed by the laws of the State of California, U.S.A., excluding its conflicts of laws and principles, and excluding the United Nations Convention on Contracts for the International Sale of Goods.