Page 2 - *Range may vary according to environment.
1 Table of Contents I. Location of functions………..……………………………………………. 2II. Connecting the speaker system………..……………………………….. 3III. Adjusting the transmitter………..………………………………………. 5IV. Tuning the speakers………..…………………………………………….. 6V. Turning the speakers off………..………………………………………... 7VI. Recharging the batt...
Page 3 - I. Location of Functions; Transmitter Front View:
2 I. Location of Functions Speaker Front View: A. Tuning indicator light (tuned) B. Standby/Charging indicator light (stdby/chrg) C. Power/volume/scan control Transmitter Front View: H. Power indicator light Accessories: Speaker Back View: D. Battery compartment cover E. Speaker power input jack F. ...
Page 4 - II. Connecting the Speaker System; I. Powering the Transmitter; iii. Connecting to a Stereo or a Computer:
AW811 AW871 Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Audio Output Audio Output Audio Output Audio Output Sortie audio Sortie audio AW811 AW871 Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Audio Output Audio Output Audio Output...
Page 5 - III. Powering the Speakers; only
4 III. Powering the Speakers There are two options to power your wireless speakers: i. AC Power Adapter: AW811 AW871 Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Ba tte ry Audio Output Audio Output Audio Output Audio Output Sortie audio Sortie audio Warning: This product is ...
Page 6 - III. Adjusting the Transmitter
III. Adjusting the Transmitter 1. Turn ON your audio source (i.e., A/V receiver, TV, stereo, etc.) and play music at a normal listening volume. 2. Set the channel select switch (K) on the back of the transmitter to 1, 2 or 3. The transmitter provides three different broadcasting frequencies. In the ...
Page 7 - IV. Tuning the Speakers; Troubleshooting
6 IV. Tuning the Speakers 1. Push the power/volume/scan controls (C) to turn each speaker ON. The standby/charging indicators (B) will illuminate red while the speakers are tuning to the transmitter. The “tuned” indicators (A) will illuminate blue, indicating that the speakers are tuned to the trans...
Page 8 - DO; VII. More Helpful Information
7 V. Turning the Speakers Off 1. Push and hold the power/volume/scan control (C) to turn each speaker OFF. You will need to hold the control for about 1.5 seconds for the speaker to turn off. 2. Confirm that the speaker is off by verifying that the red “standby/charging” light and the blue “tuned” l...
Page 10 - VIII. Troubleshooting
9 Cause and solution: • When using battery power, make sure the batteries are fresh and replace if necessary.• Check that the speaker “tuned” indicator light is illuminated blue. • Change the position of the channel select switch (1, 2 or 3) to change the operating frequency. The speaker will detect...
Page 11 - Transmitter; Speakers
10 IX. Specifications & Features Transmitter OmnidirectionalEffective transmitting range: up to 300 feet*3 selectable broadcast frequencies (between 912.5 and 914.5 MHz)Line audio input with 3.5mm stereo mini plug ( 1 / 4 " headphone adapter and “Y” cable included) UL-listed AC power adapter...
Page 12 - 2 MONTH LIMITED WARRANTY
X. Warranty 12 MONTH LIMITED WARRANTY Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the dat...