Accton EN1407-SX - Manuals

6 Quick Installation Guide Driver Installation and Configuration The diskette labeled “Driver Diskette,” that comes with thepackage contains all the software drivers available for theCheetah Gigabit Adapter. A RELEASE.TXT file, describing thecontents of the diskette is found in the root directory. D...

Cheetah Gigabit Adapter 7 Use the following procedure to make an SC connection to thenetwork. Caution: This network card uses lasers to transmit signals over fiber opticcable. The lasers are compliant with the requirements of a Class1 Laser Product and are inherently eye safe in normal operation.How...

8 Quick Installation Guide Network Card Information Select the “Properties” tab in the utility window to view thenetwork card status information and to set a locallyadministered network address. Locally Administered Network Address This field lets you set a local network MAC address tooverride the “...

Cheetah Gigabit Adapter 9 Link Parameters The network card’s link speed, PHY type (physical connectionto the network) and duplex mode can all be set from this page.However, if the “AutoNegotiate Link Parameters” box ischecked these parameters are automatically determined andthe configuration options...

10 Quick Installation Guide the PC hardware, other devices on the PCI bus, and theapplications being run. Considering all the variables involved, itis recommended to experiment with the Packet Propulsionthreshold to find the setting that maximizes the performance ofthe Cheetah Gigabit Adapter in you...

Cheetah Gigabit Adapter 11 Using VLANs The Cheetah Gigabit Adapter supports the IEEE 802.1Q VLANstandard and can be configured to participate in a networkwith other devices that use VLANs. An IEEE 802.1Q VLAN is a group of ports that can be locatedanywhere in the network, but communicate as though t...

12 Quick Installation Guide The first entry at the top of the table is the VLAN ID that isused in outbound VLAN tagged frames from the adapter. Allentries in the table are used for filtering inbound frames withunlisted VLAN IDs. Note that the switch port the adapter isconnected to should be assigned...

Cheetah Gigabit Adapter 13 Local Tests These tests can be used to test the basic functions of theadapter. Select the “Run Loopback Tests” and “Run InternalTests” check boxes either together or separately. The tests tobe performed will show “Ready” as the status in the test listbox. Then click on the...

14 Quick Installation Guide Troubleshooting Check the following troubleshooting items before contactingAccton Technical Support. PCI Compatibility Some PCI computers are not self-configuring and require youto perform some or all of the following functions by changingmotherboard jumpers and/or config...

16 Quick Installation Guide Compliances FCC Class B Certification This device complies with Part 15 of the FCC Rules. Operationis subject to the following conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference t...

Cheetah Gigabit Adapter 17 VCCI Class B Compliance (Japan) CE Mark Declaration of Conformance This is to certify that this product complies with ISO/IEC Guide22 and EN45014. It conforms to the following specifications: EMC: EN55022(1988)/CISPR-22(1985) class BIEC 1000-4-2(1995) 4kV CD, 8kV AD IEC 10...

18 Quick Installation Guide Specifications General Specifications Standards Conformance IEEE 802.3z 1000BASE-SX IEEE 802.3x Full-duplex flow controlIEEE 802.1Q VLANsIEEE 802.1p Quality of ServicePCI Bus v2.1 Host Interface 32-bit and 64-bit bus master PCI Ethernet Data Rate 1000 Mbps Transmission Mo...

International Headquarters USA Headquarters No. 1 Creation Road III, 6 Hughes Science-based Industrial Park Irvine, CA 92618 Hsinchu 300, Taiwan, R.O.C. Phone Numbers - Phone: 886-3-5770-270 Sales: 800-926-9288 FAX: 886-3-5770-267 Support: 888-398-4101 or 949-707-4847 Internet: [email protected]...