ABC Office 35 EZload - Manuals

6 Features Guide A. POWER SWITCH: Located at the back of the machine, applies power to the laminator.The ‘ON’ position is indicated by the ‘ ’ symbol. The ‘OFF’ positionmarked ‘ ’ symbol (figure 1). B. CONTROL PANEL: (figure 2) • POWER LAMP ( ): Indicates that the laminator is plugged in and the mai...

 7 Film Loading and Threading Refer to Figure 6 and follow the procedures to remove the Feed Tableand Heat Shield. Remove the heat shield by sliding it to the left or right and lifting itup and away from the laminator. Slide the feed table latch to the left. Lift the feed table upwards and away fro...

8 Laminating Tips • Do not attempt to laminate abrasive or metal items such as staples or paper clips as they will damage the heat shoes and rollers. • Do not force items into the nip area of the rollers. An item that is not easily drawn into the laminator is probably too thick to laminate. • Wrinkl...

9  Troubleshooting Guide SYMPTOM • POWER indicator does not illuminate when Main power switch is in the ‘ON’ ( )position. • Laminated items are wrinkled. • Laminated items are wavy. • Laminated items are cloudy. • Unsatisfactory adhesion to media. CORRECTIVE ACTION Push standby switch on control pa...