Aavix AGT307 - Manuals

SERVICE   Servicing   requires   extreme   care   and   knowledge   and   should   be   performed   only   by   a   qualified   service   technician.  For   service   we   suggest   you   return   the   product   to   your   nearest   AUTHORIZED   SERVICE   CENTER   for   repair.   When  servicing, ...

KNOW  YOUR  TILLER/CULTIVATOR           1. Upper  handle   2. Two-­‐hand  safety  switch   3. Cable  clip   4. Power  plug   5. Knob  (4x)   6. Center  handle   7. Motor  housing   8. Motor  support  plate   9. Tine  assembly                 1   2   4   3   5   7   8   9   6  

ASSEMBLY     You  Will  Need    (Item  not  supplied)   ! Philips  screwdriver   ! Suitable  personal  protective  equipment     (Item  supplied)   1. Upper  handle   2. Center  handle   3. Wheel  x  2   4. Wheel  cap  x2   5. Knob  x4   6. Bolt  x4   7. Cable  clip  x  2   8. Cable  strain-­‐relief...

    WARNING:   If  any  parts  are  damaged  or  missing  do  not  operate  this  product  until  the  parts  are  replaced.  Failure  to  heed  this  warning  could  result  in  serious  personal  injury.  Call  our  customer  service  help  line.     WARNING:   Do   not   attempt   to   modify   t...

  MAINTENANCE   BEFORE  CARRYING  OUT  MAINTENANCE  OPERATIONS,  DISCONNECT  POWER  SUPPL Y.   Before  each  use  check  the  extension  cord  for  signs  of  damage  or  ageing.  Replace  the  cable  if  it  is  cracked,  split  or  otherwise   damaged.   Check   the   condition   of   the   tines ...

ADDING  TRANSMISSION  LUBRICANT:   Drain  screw  plug  M10x10  (A)  is  located  on  the  right  side  of  transmission  housing.  Lay  the  tiller/cultivator  on  its  left  from  user’s  perspective  side  and  clean  the  transmission  of  dirt  and  debris  prior  to  removing  the  drain  screw...

Abnormal  noises   Tine  is  jammed  Lubrication  running  out  Bolts,   nuts   or   other   components  are  loose.   Switch   off.   Wait   till   tines   comes   to   a   complete  stop.  Remove  jammed  objects.  Tiller/cultivator   must   be   repaired.   Send   in   to  Service  Centre  for  r...