3M X40C - Manuals

4 PART NAMES THE PROJECTOR Indicates the correspondingreference page AC power inlet Power switch Focus ring 15 Zoom ring 15 Remote sensor 13 Lens Elevator foot 6 Air filter 31 Speaker Rear adjuster foot 6 lamp indicator 35 temp indicator 35 power indicator 14 menu button Terminal Panel on/off button...

5 THE REMOTE CONTROL THE TERMINAL PANEL STANDBY/ON button 14 VIDEO button 15 MENU button 23 RGB button 15 BLANK button 22 SEARCH button 22 VOLUME button 17 MUTE button 17 KEYSTONE button 20 ASPECT button 22 AUTO button 19 MAGNIFY buttons 21 FREEZE button 21 POSITION button 18 ESC button 23 , , , Cur...

6 CAUTION • Install the projector in a suitable environment according to instructions of the “Product Safety Guide” and this manual "Operator's Guide". • If you press the elevator button without holding the projector, the projector might crash down, overturn, smash your fingers and possibly ...

7 Refer to the illustrations and tables below to determine the screen size andprojection distance. Adjusting the Screen Size and Projection Distance Top view a c b Lens center The screen Side view Top view a c b Lens center The screen Side view If 4:3 aspect ratio If 16:9 aspect ratio 4 3 9 16 The v...

8 DVD players 11 VCRs 11 Laptop computers 10 Desktop computers 10 Indicates thecorrespondingreference page ATTENTION Precautions to observe when connecting other devices to the projector • Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device...

9 Ports and Cables Refer to the table below to find out which projector port and cable to use for connecting agiven device. Use this table for determining which cables to prepare. About Plug-and-Play Capability • This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by conne...

10 Laptop computer Desktop computer CONNECTING YOUR DEVICES (continued) Connecting to a Computer ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRTdisplay or to simultaneous LCD and CRT displa...

11 DVD player VCR Connecting to a DVD Player Connecting to a VCR B C A If using a component video connection If using an audio/video connection COMPONENT VIDEO IN COMPONENT VIDEO OUT AUDIO/VIDEO IN AUDIO/VIDEO OUT S-VIDEO IN S-VIDEO OUT If using a S-video connection COMPONENT cable AUDIO/VIDEO cable...

1 Remove the battery cover Slide back and remove the battery cover in the direction of thearrow. Insert the batteries Align and insert the two AA Alkaline batteries (that came with the projector) according to their plus and minus terminals (as indicated in the remote control). Close the battery cove...

13 • The remote control works with both the projector's front and rear remotesensors. • The range of the remote sensor on the front is 3 meters with a 90-degreerange (45 degrees to the left andright of the remote sensor), and backis 3 meters with a 60-degree range. • Since the remote control uses in...

14 1 Make sure that the power cord is firmly andcorrectly connected to the projector and outlet 2 3 Press the STANDBY/ON button of remote control or the on/off button of control panel • The projector begins warming up and the power indicator blinks green. • The power indicator stops blinking and lig...

VIDEO ASPECT MUTE KEYSTONE FREEZE OFF ON VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON Control panel 15 RGB 6 Use the zoom ring to adjust thescreen size 7 Use the focus ring to focus thepicture 5 Press the RGB button of the Remote control or the rgb button of the control panel Press this button to...

16 VIDEO ASPECT MUTE KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the STANDBY/ON button of remote contr or ol or the on/off button of control panel The message "Power off?" will appear on the screen for approximately 5 seconds. ...

17 VIDEO ASPECT MUTE KEYSTONE FREEZE OFF ON MENU POSITION ENTER ESC RESET VOLUME MAGNIFY AUTO BLANK RGB SEARCH STANDBY/ON 1 Press the VOLUME button As illustrated on the right, a dialog willappear on the screen to aid you in adjustingthe volume. 1 Press the MUTE button As illustrated on the right, a...

18 1 Press the POSITION button As illustrated on the right, a dialog will appear on the screento aid you in adjusting the position. 2 Use the , , , buttons to adjust the position When you want to initialize the position, press the RESETbutton during adjustment.Press the POSITION button again to clos...

19 The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals. NOTE 1 USING THE AUTOMATIC ADJUSTMENT FEATURE Press the AUTO button Horizontal position (H. POSIT), vertical position (V.POSIT), clock phase (H. PHAS...

20 • This function may not be work well with some types of input signals.• The adjustable range for correcting keystone distortions will vary with the type of input signal. NOTE CORRECTING KEYSTONE DISTORTIONS 1 Press the KEYSTONE button As illustrated on the right, a dialog will appearon the screen...

21 The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state. NOTE • The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO, BLANK ON/OFF o...

22 SIGNAL SEARCHING SELECTING THE ASPECT RATIO TEMPORARILY BLANKING THE SCREEN 1 Press the SEARCH button When you press the SEARCH button, the projector beginssearching for input signals. If it detects an input signal, thesearch will cease and the projector will project the detectedsignal. If the pr...

23 USING THE MENU FUNCTIONS 1 Press the MENU button The menu display appears on the screen. Theprojector has the following menus: MAIN,PICTURE-1, PICTURE-2, INPUT, SCREEN, andOPTION. Select a menu using the / buttons. The current settings of the items that can be manipulated via theselected menu app...

MAIN Menu Item Description BRIGHT Adjust Brightness: Light ⇔ Dark CONTRAST Adjust Contrast: Strong ⇔ Weak ASPECT Select Aspect Ratio: At rgb Input or Hi-Vision 1125i(1035i/1080i)/750p of component videoInput:4:3 ⇔ 16:9 At video Input, s-video Input or 525i/525p/625i of component video Input:4:3 ⇔ 16...

MULTIFUNCTIONAL SETTINGS (continued) INPUT Menu With the INPUT menu, the four items shown in the Table below can beperformed. With inputting of rgb in signal, the horizontal and vertical frequencies of the signal will be displayed on the initial screen of theINPUT menu.Perform each operation in acco...

SCREEN Menu With the SCREEN menu, the two items shown in the Table belowcan be performed.Please perform each operation in accordance with the instructionsin the Table. 27 SCREEN Menu Item Description BLANK Selection of BLANK Screen: . . ⇔ . . ⇔ . . T h e B L A N K S c r e e n m a y b e v o l u n t a...

MULTIFUNCTIONAL SETTINGS (continued) OPTION Menu With the OPTION menu, the five items shown in the Table belowcan be performed.Please perform each operation in accordance with the instructionsin the Table. MENU : SELECT MAINPICTURE-1PICTURE-2INPUTSCREENOPTION VOLUMEAUTO OFFWHISPERLAMP TIMEFILTER TIM...

29 THE LAMP HIGH VOLTAGEHIGH TEMPERATUREHIGH PRESSURE Before replacing the lamp, check the serial number of the replacement lamp bulb (sold separately:78-6969-9463-7 for S40 / 78-6969-9565-9 for X40), then contact your local dealer. The LCD projector uses a glass lamp bulb. It is a mercury lamp with...

30 • The lamp indicator is also red when the lamp unit reaches high temperature. Before replacing the lamp, switch power OFF, wait approximately 20 minutes, and switch power ON again. If the lamp indicator is still red, replace the lamp. NOTE Replacing the lamp All projector lamps will wear out even...

THE AIR FILTER Caring for the air filter The air filter should be cleaned about every 100 hours. If the lamp indicator and temp indicator blink red simultaneously, or a message prompts you to clean the air filter when you turn on the unit, the filter needs to be cleaned. (See "RelatedMessages...

32 Replacing the air filter 01CP-S225/X75/Vol1/E/最終    02.10.17    10:24  AM    ページ27 1 3 5 4 2 If the soiling will not come off the air filter, or it becomes damaged, then it needs to bereplaced. Please contact your local dealer, after confirming the model of yourseparately sold replacement air fil...

OTHER CARE Caring for the inside of the projector : In order to ensure the safe use of your projector, please have it cleaned and inspected byyour local dealer about once every 2 years. Never try to care for the inside of the unityourself. Doing so is dangerous. Caring for the lens : Lightly wipe th...

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED Related Messages When the unit's power is ON, messages such as those shown below may be displayed. Whenany such message is displayed on the screen, please respond as described below. 34 Note 1: Although this message will be automatically disapp...

WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued) Regarding the Indicator Lamps Lighting and flashing of the power indicator, the lamp indicator, and the temp indicator have the meanings as described in the Table below. Please respond in accordance with the instructions within the ...

Phenomena That May Easily Be Mistaken for Machine Defects Before requesting repair, check in accordance with the following chart.If the situation cannot be corrected, then contact your dealer. Although bright spots or dark spots may appear on the screen, this is a unique characteristic ofliquid crys...

Dimension Diagram Item Specification Product name Liquid crystal projector Liquidcrystalpanel Panel size 1.8 cm (0.7 type) Drive system TFT active matrix Pixels S40 ： 480,000 pixels (800 horizontal x600 vertical) X40 ： 786,432 pixels (1024 horizontal x 768 vertical) Lens Zoom lens F=2.0 ~ 2.3 f=18 ~...

38 Acccessories..................................................................................Part Number UHB lamp, 150W ( S4 0) ............................................... .......... .........78-6969-9463-7 UHB lamp, 150W ( X 40) .................. ....... ............................ . .......