3M VOL-1081 - Manuals - manualsarea.com

Page 2 - This page left blank intentionally

Page 3 - Contents

Page 3 Contents 1. Introduction ...................................................................................................... 4 Figure 1-1. The VOL-1081 Fiber Switch ......................................................................... 4 Features ...........................................

Page 4 - Features

Page 4 1. Introduction The VOL-1081 Mini-switch is a compact desktop size switch that is ideal for small officeor home office networks. It provides wire-speed, Fast Ethernet switching offering high-performance at low-cost. Figure 1-1. The VOL-1081 Fiber Switch ÿ The VOL-1081 Mini-switch provides 8 s...

Page 5 - Hardware Description; Front Panel

Page 5 2. Hardware Description The VOL-1081 Mini-switch is a compact switch with 8x 10/100 N-way UTP switch portsplus one 100Base-FX fiber port. Front Panel ÿ The Front Panel of the VOL-1081 Mini-switch consists of 8x 10/100 N-way UTP switchports (automatic MDI/MDIX), one 100Base-FX fiber port and o...

Page 6 - Figure 2-2 The Rear Panel of the VOL-1081 Fiber Switch

Page 6 LED Indicators ÿ The following table describes the LED status and description. The LEDs provide areal-time indication of system conditions. Rear Panel The 3-pronged power plug is located at the Rear Panel of the Mini-switch as shownin Figure 2-2. The Switch will work with 100-240V AC, 50-60Hz...

Page 7 - Desktop Installation; Attaching Rubber Feet

Page 7 Desktop Installation ÿ Set the Switch on a clean, smooth, level, and sturdy surface with a power outlet nearby. ÿ Make sure there is enough clearance around the Switch to allow attachment of cables, power cord and air circulation. Attaching Rubber Feet ÿ Make sure the surface on the bottom of...

Page 8 - Network Application; Desktop Application

Page 8 3. Network Application This section provides an example of network topology in which the Switch is used. Ingeneral, the VOL-1081 Mini-switch is designed to be used as a desktop or segment switch.You can use the VOL-1081 Mini-switch to connect PCs, workstations, and servers to eachother by con...

Page 9 - Diagnosing with the LED Indicators; Link

Page 9 4. Trouble Shooting This troubleshooting section is intended to help you solve the most common problems onthe VOL-1081 Fiber Switch. The Switch can be easily monitored through panel indicatorsto assist in identifying problems. This section describes common problems you mayencounter and where ...

Page 11 - FCC Statement

Page 11 Power requirements AC Input 100 to 240 Volts AC, 50 to 60Hz Power consumption Max. 12 Watts Physical and Environmental Specifications Dimensions Switch 250 x 132 x 37 mm L x W x H, (9.84 x 5.19 x 1.47 inches) Weight Switch 1.01 kg (2.2 lbs.) Temperature Operating Storage 0 to 45 °C (32 to 11...

Page 12 - Telecommunications

Page 12 3M, Volition, VF-45, and the “dot wave” symbol are trademarks of 3M Important NoticeBefore using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks andliability associated with such use. Warranty; Limited Remedy; Limited Lia...