Page 3 - WARNING; Safeguards; INTENDED USE; Caution; Note
ii 3M Multimedia Projector MP8750 3M 1999 WARNING Safeguards INTENDED USE Before operating the machine, please read the entire manual thoroughly. The 3M Multimedia Projector MP8750was designed, built, and tested for use indoors, using 3M lamps, 3M ceiling mount hardware and nominal localvoltages...
Page 4 - PRODUCT SAFETY LABELS
3M 1999 3M Multimedia Projector MP8750 iii PRODUCT SAFETY LABELS The following safety labels are used on or within the MP8750 projector to alert you to items or areas requiring yourattention: LOCATION OF LABELS SAVE THESE INSTRUCTIONS The information contained in this manual will help you operat...
Page 5 - Warranty; LIMITED WARRANTY
iv 3M Multimedia Projector MP8750 3M 1999 Warranty LIMITED WARRANTY 3M warrants this product against any defects in material and workmanship, under normal use and storage, for a period of twoyears from date of purchase. Proof of purchase date will be required with any warranty claim. In the even...
Page 7 - Section 2: Production Description
2 3M Multimedia Projector MP8750 3M 1999 Section 2: Production Description 2-1. Machine Characteristics The MP8750 integrates metal halide lamp and Digital Light Processor (DLP) technology. It accepts input from computerand/or video sources and projects a super bright image. The MP8750 Multimedi...
Page 8 - Terminal Connection Panel
3M 1999 3M Multimedia Projector MP8750 3 Section 3: Set Up/Connections 3-1. Terminal Connection Panel The MP8750 projector has terminal connections on the backside of the projector. Refer to Section 3.4-Cable Connections formore detail. 1. AUX: Only compatible with 3M devices. 2. SVHS/AUDIO IN: ...
Page 9 - Mouse Connection; Cable Connections
4 3M Multimedia Projector MP8750 3M 1999 3-3. Mouse Connection The MP8750 has mouse emulation capability. Connect your computer mouse to the MP8750 and control computer mousefunctions using the remote control. 1. Power down the computer and projector. 2. Remove the mouse cable connection from yo...
Page 10 - Cable Connection, continued
3M 1999 3M Multimedia Projector MP8750 5 Cable Connection, continued Figure 3-4. Cable Connections Audio cable optional MAC cable optional
Page 11 - Image Height
6 3M Multimedia Projector MP8750 3M 1999 3-5. Image Size (Projector-to-Screen Distance) Adjust the size of the projected image using the zoom control buttons. The projected image size values, as they relate to thedistance-to-screen value, are shown for focal lengths of f=25mm and f=45mm. Also sh...
Page 12 - Section 4: Operating Instructions; Power Up Projector
3M 1999 3M Multimedia Projector MP8750 7 Section 4: Operating Instructions 4-1. Power Up Projector Read the Important Safeguards before operating the MP8750 projector. After all cable connections have been completed, theprojector can be powered up. During operation, keep the exhaust and intake a...
Page 13 - Standby Mode; Projector Power Down; Using System Menus
8 3M Multimedia Projector MP8750 3M 1999 4-2. Standby Mode When the projector is not being used, place it into standby mode. 1. Press the Standby button. 2. The lamp will switch off and the red LED will illuminate. ü ü Note The fan motor will continue to run for a few minutes until the projector...
Page 14 - Menu Adjustments/Settings
3M 1999 3M Multimedia Projector MP8750 9 Sub-Menu: Select the desired sub-menu (see Main Menu). Press the Disc Pad to the right or the Enter button to display thesub-menu. The sub-menu name (1) is on the top line. A slider bar (2) at the right of a sub-menu line indicatesyou can increase or decr...
Page 17 - Section 5: Remote Control; Remote Control Functions
12 3M Multimedia Projector MP8750 3M 1999 Section 5: Remote Control 5-1. Remote Control Functions Aim the remote control toward the projection screen or at the sensor. Press desired remote button to send a signal to theprojector. *Standby: Switch the projectorbetween Standby mode (lamp off,fan o...
Page 18 - Battery Replacement
3M 1999 3M Multimedia Projector MP8750 13 5-2. Battery Replacement The remote control uses two AAA batteries. The battery cover is located on the back of the remote control. 1. Press the locking tab (1) to release door. Figure 5-1) 2. Lift up on the door (2) to remove it and set it to the side. ...
Page 19 - Section 6: Maintenance; Replacing The Air Filter
14 3M Multimedia Projector MP8750 3M 1999 Section 6: Maintenance 6-1. Replacing The Air Filter For best performance, replace the air filter each time the projection lamp is changed. ü ü Note Periodically check air filter for excess dust or dirt.Replace or clean as needed. 1. Unplug the power cor...
Page 20 - Replacing Projection Lamp; Important Note
3M 1999 3M Multimedia Projector MP8750 15 6-2. Replacing Projection Lamp The metal halide lamp of the projector has a limited lifetime of approximately 2000 hours. If the projected image appearsdark or a red lamp life indicator bar displays during projector startup, you should change the lamp an...
Page 21 - Lamp Life Indicator; Cleaning the Projector
16 3M Multimedia Projector MP8750 3M 1999 6-3. Lamp Life Indicator The elapsed operating time of the lamp is displayed on the Info sub-menu. From the Main menu, select INFO to display thelamp life. As long as the lamp indicator bar is green, the lamp is good. When the bar changes to red, the lam...
Page 22 - Section 7: Troubleshooting; Troubleshooting Problems and Solutions; Service Information
3M 1999 3M Multimedia Projector MP8750 17 Section 7: Troubleshooting 7-1. Troubleshooting Problems and Solutions Problem Probable Cause Possible Solution Image is disturbedor unstable. • Wrong Sync setting. • Wrong Trackingvalue. • Set to factory default setting. (See below!) • Change Sync setti...
Page 23 - Section 8: Product Specifications; Technical Specifications
18 3M Multimedia Projector MP8750 3M 1999 Section 8: Product Specifications 8-1. Technical Specifications Display Technology Single DMDResolution 1,024 x 768 (total 2,359,296 pixels) 625 (PAL) / 525 (NTSC) video lines to full screen size magnification Brightness 1,500 ANSI lumensColors 16,770,00...
Page 24 - Accessory & Spare Parts List; How to Order
3M 1999 3M Multimedia Projector MP8750 19 8-2. Accessory & Spare Parts List Part Description Part Number Projection Lamp Kit - Metal Halide Lamp (350W) - Air Filter 78-6969-8586-6 Air Filter (included in lamp kit 78-6969-8577-5 ) 78-8118-3476-7 Power Cords (U.S., UK, Europe) For special powe...