3M AT-DIS7_PROHD - Manuals

3M AT-DIS7_PROHD – Manual in PDF format online.

Manuals:

Manual 3M AT-DIS7_PROHD

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5

Summary

Page 2 - III. This section is for SGV Exhaust machines:; RANDOM ORBITAL SANDERS SERVICE INSTRUCTIONS

34-8700-5191-8 2 Revision 10/03/07 DISASSEMBLY INSTRUCTIONS Changing Grips: 1. The Grip has two “tabs” that wrap around the body of the sander under the inlet and exhaust. Use a small screwdriver to pick out one of the “tabs” of the Grip, and then continue to go underneath the Grip with the screwdri...

Page 3 - ASSEMBLY INSTRUCTIONS; II. This section continued from Section I for CV Ex-; Press Tool Top

34-8700-5191-8 3 Revision 10/03/07 B) Remove the Ø 1 in. (28 mm) Hose SGV Swivel Exhaust Assembly from the Housing and SGV Skirt Adapter or SGV Shroud Adapter. C) Pull the SGV Retainer out of the bore of the Swivel Exhaust Assembly and remove the two O-rings. D) Remove the Vacuum Shroud or Vacuum Sk...

Page 5 - Troubleshooting Guide

34-8700-5191-8 5 Revision 10/03/07 Symptom Possible Cause Solution Low Power and/or Low Free Speed Insufficient Air Pressure Check air line pressure at the Inlet of the Sander while the tool is running at free speed. It must be 90 psig (6.2 Bar). Clogged Muffler(s) See the “Housing Disassembly” sect...

3M Manuals